Purchased this glue to do a specific job of gluing a smooth plastic sheet to wood, which required the plastic sheet to be bent over to form the roof of a 16mm railcar. Holding the plastic in place with clothes pegs I left it overnight to set. In the morning I took the pegs off and there was the roof, perfectly and strongly glued in place. I highly recommend this glue for such jobs. It's done a cracking job. You don't need much glue and it dries clear. Wipe off any excess before it dries.
Verified purchase: Yes | Condition: New
I had previously used UHU to build card kits for my model railway and was happy with the result. I would decant it into smaller bottles with a finer tip. Now I needed to build some smaller kits and needed an even narrower tip. I came across this glue online and it seemed to be what I needed. I can report that with the additional tip supplied it was EXACTLY what I wanted. I can now put the glue in exactly the right spot. One word of warning however! With UHU, once you have stuck two surfaces together, you have a couple of minutes to move them around into place before the glue sets too much. You only get about 10 seconds with this stuff! I would still totally recommend it however and have been really pleased with the kits I have completed.
Verified purchase: Yes | Condition: New
Perfect adhesive for modelling with card or light wood. It dries quickly, which means less attention needs to be paid to holding small parts together with your fingers, and forms a secure bond between surfaces to be joined. I've worked with card modelling all my life and have never known a better glue than this product. Spillages are easy to deal with and the glue dries to a transparent finish.
Verified purchase: Yes | Condition: New
Good product,you only need very small quantities and it gives a very quick and strong bond also excellent for doing the glazing on Metcalfe kits,the only downside to this product is that the glue seems to set in the nozzle and in my experience have had to unblock the nozzle each time I wanted to use this product
Verified purchase: Yes | Condition: New
I have tries various adhesives for assembling card kits & structures, this is by far the best I have tried. It allows time to make positional adjustments, then with the application of pressure makes an instant bond. Only a small quantity is needed so it is also economical. The only downside so far is that keeping the nozzle clean requires constant attention - this is a result of the adhesive being so effective.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Paints
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Paints