Estimated by Mon, 11 Aug - Wed, 13 AugEstimated delivery Mon, 11 Aug - Wed, 13 Aug
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
NewNew
ATX version: 2.3. Motherboard power connector: 20+4 pin ATX. ATX power connector (20+4 pin): Yes. Power Factor Correction (PFC) type: Active. Total power: 600 W. Max output current (+12V): 40 A. Max output current (+3.3V): 18 A.
Purchased as a replacement for a 550w unit which had lasted for 4 years of heavy usage.
Keeps tripping the consumer panel RCD. Finally crackling and the PC shut down...
This 600w unit lasted for just one week... The computer spec hasn't changed for a couple of year and the calculated max load is under 500w. Now running a 500w unit fine.
the packaging is better than the contents. after my 5th or so build i stopped testing everything before i would start a build, because never had a problem, just built my 18th (i think) fired it up an nothing. preformed a few continuity checks in case cable managing tugged something loose, chased it back to the PSU. no fan spin should have gave it away. pulled the PSU and found it to be dead. i desired a closer look. very cheep feel, capacitors crammed together, and a pretty poor main board. at least i know not to buy or recommend kolink products again. wouldn't know if i didn't give them a try. i pride myself on building as much bang for the buck rigs as i can. i spend a long time sourcing parts, not all workout, but this is first time iv had a new out the box that didn't work.