CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandHogue
MPN48000
GTIN0743108480007
UPC0743108480007
Model48000
eBay Product ID (ePID)2255303098
Product Key Features
For Gun MakeColt
TypeGrip
For Gun TypeHandgun
Ratings and reviews
Most relevant reviews
- 26 Jan, 2024Most favourable review
I really like these grips
II have these grips on my most-used Colt D frames (Cobra, Detective Special). They fit good, look good, and they fit my hand well. I just wish Hogue made this exact grip for S&W J frames.Verified purchase: YesCondition: New
- 30 Nov, 2021Most critical review
Need a jackhammer to push out the grip locating pin from the frame!
Looks like a nice product but impossible for me to install myself. The directions call for you to push or knock out the Colt grip locating pin at the bottom of the frame to install the Hogue pin and retaining screw. After bending one of my brass punches and finally using a 2 pound ball peen hammer and steel punch, all I managed to do was move the pin a 1/16 inch! So now this is a gunsmith job that will sit around for a month or two (hunting season) until heat and a machine bench press can get the pin out. This Colt Detective has had replacement grips before but they all just replaced the original grips with original mounting screws. This Hogue grip looked good and the instructions seemed simple, but I’d rather rebuild another Porsche flat six than install a Hogue grip!Verified purchase: YesCondition: New
- 07 Apr, 2017
Fits great!
I purchased these Hogue grips on the outside chance they would fit a Colt Commando .38 special I have. Fortunately, they fit great. The gun is much easier to handle than with the stock wood grips.Verified purchase: YesCondition: New
- 23 Nov, 2017
Fits
It’s “after market” but good fit and feel on the revolver. Easy to put on with a bit of effort to remove the handle locating pin (mine was tack welded). I would recommend it to a friend. Fits my 1978 Colt Detective Special.Verified purchase: YesCondition: New
- 07 May, 2016
Fit my Cobra Perfectly
The grip was easy to install and fits my post 1966 Cobra perfectly. No problem using my speedloader. MUCH more comfortable and concealable than the original grips. I'm well pleased.Verified purchase: YesCondition: New
- 23 May, 2018
"It Rocks the M-200 she doesn't know she isn't a Colt."
It's hogue, also this product was bought for the Rock Island Armory M 200 Revolver which is based on the Colt detective small D frame, I spoke with Armscor and called Hogue direct they were great in helping me out and to narrow it down.Verified purchase: YesCondition: New
- 07 Jul, 2025
These work the best.
These grips have the correct shape to keep everything in place and lined up naturally. They also reduce recoil. I used some beautiful grips that come on the TALO models, but it felt like the weight of the revolver was resting on my knuckle via the trigger guard. The geometry was a little off. These stopped that problem.Verified purchase: YesCondition: New
- 26 Feb, 2020
Grip is nice but useless
Grip rubber sits to close to hammer when I pull back the hammer it won’t lock because it hits the grip very poor design very very very hard to install groves don’t match will go on tho looks nice but won’t work if you want to pull the hammer back Manuel
Verified purchase: YesCondition: New
- 11 Nov, 2022
Cobra grip
Well, these are the correct grips for new cobras and king cobras. They have a short grip frame. Hovever the 47000 product is incorrectly advertised for these. But these seem a bit shorter than a target 4” model could use….. better for carry guns with short barrelsVerified purchase: YesCondition: Pre-owned
- 17 Jun, 2020
Nice Grip
Item make gun easier to handle I Like itVerified purchase: YesCondition: New
