CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandSSI
MPNXSI-BL-17
UPC0888151007976
ModelXSI-BL-17
eBay Product ID (ePID)2277652038
Product Key Features
FeaturesCircular (Prime Focus)
MountingGrip
TypeLaser Sight
Dimensions
Weight0.1 lbs
Ratings and reviews
Most relevant reviews
- 04 Feb, 2018
Does not fit snug in bore, but A Slight Modification Will Fix It.
Fits sloppy in the chamber. Not easy to get the light to shoot out the muzzle without glancing off the bore and causing reflections which kills accuracy. The fix is to place exactly one layer of cellophane tape around the body of the tool. Do not overlap. Now, the laser will always fit snugly, and perfectly centered in the chamber. Gravity will not dislodge it, but It will pull out easily with a slight tug of the cable. Don’t complain that the laser is not bright enough outdoors, bore sighting is properly done indoors at about 20 feet. Get the crosshairs right on the laser dot, and you’ll be on the paper at the range. Fine tune from there. Oh, NEVER close the bolt on this or you’ll have a bad day. You will likely ruin the tool and have a heck of a time removing it from the chamber, even with a cleaning rod.
Verified purchase: YesCondition: New
- 25 Jan, 2018
SSI Sight-Rite Laser Bore Sighter for 17 HMR
I own 9 of these bore sighters and highly recommend them to other shooters. They save you dollars on ammo, are easy to use and are in expensive. Thanks for a great addition to my shooting tools.Verified purchase: YesCondition: New
- 31 Mar, 2021
Works very well I would recommend it
They bore sight is good if not made to get you dead on but it will put you on the paper at a hundred yards just by putting the crosshairs on the Red Dot at about 25 feet and then you do your fine adjustment so if you were thinking that it's going to get you dead on it's not you will still have some adjustments to make but it is a very good tool and helps you get to the center of your target fasterVerified purchase: YesCondition: Pre-owned
- 28 May, 2020
Tolerance too loose
Laser bore sighter fits too loose in chamber and allows beam to move all around. Tried to tighten fit by application of a layer of scotch tape around bore sighter, which made it better, but still too loose. Another layer of tape made it too tight. This device should be machined to closer tolerances as it should work out of the box without messing with it.Verified purchase: YesCondition: New
- 05 Jul, 2016
Bore sighting
This is the fastest way to be on paper and will take less amo which is a big savings.Verified purchase: YesCondition: New
- 27 Apr, 2019
Great bore scope
It helped me sight my gun in without firing a shotVerified purchase: YesCondition: New
- 10 Apr, 2018
terrific. thanks
Verified purchase: YesCondition: New
- 25 Sep, 2022
Bad quality boresight
Super loose in the chamber. Can't be used accurately.Verified purchase: YesCondition: New
- 01 Jun, 2022
Great product
Great product works wellVerified purchase: YesCondition: New
- 09 Nov, 2021
product was as stated
product was as statedVerified purchase: YesCondition: New
