Check the item description to confirm this fits your vehicle
Picture 1 of 4
Stock photo
Picture 1 of 4
Stock photo
Sealey VS5293 Spark Plug Lead Tool
jubei189 (580)
100% positive Feedback
Price:
£9.04
+ £2.94 postage
Returns:
Condition:
Sealey Spark Plug Lead Tool. VS5293. Helps To Pull HT leads Off The Plug
- Buy it nowSealey Spark Plug Lead Tool. VS5293. Helps To Pull HT leads Off The Plug
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandSealey
MPNVS5293
Manufacturer Part NumberVS5293
UPC5051747344105
eBay Product ID (ePID)2288061212
Product Key Features
Number of Pieces1
Set or Single ItemSingle Item
Dimensions
Weight82 g
Length290mm
All listings for this product
Ratings and reviews
Most relevant reviews
- 17 Apr, 2018Most favourable review
Useful But Not Total Solution
I purchased this product in order to avoid having to dismantle the top of my engine, and whilst it is perfect for deep rooted leads, I have a 2003 Audi A3, and even if I attempted to adapt this tool the no3 lead would still be virtually impossible to remove without removing a mire of T-bolts and screws to boot, (no pun intended). In conclusion if you can see all of the leads this is a great tool, however whilst it was helpful it was not the total solution to my problem. Kindest regardsVerified purchase: YesCondition: New
- 29 Aug, 2018Most critical review
Does not work out of the box
The metal tube that goes into the hollow part is simply welded on inside the hollow part making it stick out abput 3mm inside. When the tool was slid over the HT leads, this tube was fouling on the top of the HT leads before the hooks were engaged on the sides which was necessary to pull it out. I used a dremmel to grind material off this tube inside the hollow part of the tool in order to stop it from fouling and it worked perfectly. If you have no means of modifying it, don’t buy it. .Verified purchase: YesCondition: New
- 19 Sep, 2018
Essential tool
A must have tool when changing spark plugs on the smart cars. The tool is of good construction and has lasted me changing 6 plugs. The only slight inconvenience is the gap at the end to lock in to the ht lead plug is slightly too narrow so it is fiddly to get locked in.Verified purchase: YesCondition: New
- 16 Mar, 2018
Need to do a bit of adjusting
The lugs do not quite fit over the spades on the spark plug cover. You will need to file away the indents to make it fit. If you use tiny or swiss files they will do the job. Once adapted the tool works a treat and is much easier than trying to make your own.Verified purchase: YesCondition: New
- 16 Nov, 2017
Highly Recommend
This tool makes changing spark plugs on my Brabus Smart a simple job, which without it would take much longer and also promote the chance of damaging the HT lead to a minimum/ With out it would have been very difficult.Verified purchase: YesCondition: New
- 13 Jun, 2017
BAD QUALITY
The tool is of very bad quality. Trying to take the first plug and it split apart. The soldering of the parts is weak. I was not even possible to take out the first cable. I had to solder it back. But I have to use it very carefully because the material is of very bad quality. My advise: DON'T BUY IT.
Verified purchase: YesCondition: New
- 17 Aug, 2016
handy tool to use
We bought this tool a little to late tried to replace the spark plugs with out it and damaged the plug leads, wish I bought it before hand anyway hope I can pass this information on to save others from making the same mistake thank you for providing a quality tool at the right priceVerified purchase: YesCondition: New
- 28 May, 2020
If you work on or own this type of vehicles then it makes life easier.
working with VW/Audi/ and smart, this tool helps get the job done quick and easy.Verified purchase: YesCondition: New
- 12 Dec, 2018
Don't by it unless you are prepared to do work on it/
This HT plug cap remover did not work as received. The 5mm rod that was welded inside the remover was welded too far down and as a consequence it was hitting the top (metal) part of the plug cap and therefore the tool could not engage with the metal"teeth" on the plug cap to pull it off. I therefore had to grind away the 5mm rod in order to get it to fit.Verified purchase: YesCondition: New
- 16 Aug, 2017
sealey spark plug HT lead removal tool
Well made but initially unusable due to the rod attachment, the rod hits on the top of the plug cap (puller used on an Audi) this made it impossible to engage the cut outs, the solution was to file a slope on the rod therefore reducing the diameter of the rod, the tool now works superblyVerified purchase: YesCondition: New
