BEWARE the SKF VBA6543 technical bulletin telling you it's NOT the normal fitting on these bearings
Good quality product BUT BEWARE there's an SKF TECHNICAL BULLETIN VKBA 6543 re fitting them because so many are being fitted incorrectly by pushing them in in a vice or press rather than using the specific 'puller' on the car, which costs some £400 so unless the garage has it or can rent/borrow from another local garage it'll NOT be done properly. Without it it damages the inner race and causes premature failure. Mine lasted 20k miles and were knackered. Most garages DO NOT KNOW THIS and will press it in as normal 'off' the car and you'll be sending £200 or so £s plus fitting again in 18 months.