 |
For the price including 3 pullers, you really can't complain too much, but the build quality isn't great at all. The nuts aren't nylocs so they come so tight, you can't actually move the arms. Once loosened every one of them just wants to unwind and fall off. If you replace the nuts for nylocs or simply Loctite them, they seem to work fine. Overall - ok to hanmve on hand for the odd job, but most certainly not for regular use and abuse.
Verified purchase: Yes | Condition: New
The standard of product is not what I'd normally expect from Sealey but then I had my suspicions due to the price. The bolts that hold the legs on are so tight that it is impossible to open the puller to use it. They need to be loosened to use the product (I will be replacing the nuts with Nylock ones). The casting is not the best but OK. The head of one of the centre screws is not totally hexagonal and has one face which has been ground to an angle. Saying that these pullers are good value and will do just fine for the small amount of use I will give them playing with my car.
Verified purchase: Yes | Condition: New
Mostly fit for purpose. The only observation is that the fingers that are drained to grab the edge of the bearing or gear are cast iron and do not have a sharp edge. So for delicate operations one would need to grind the rough surfaces to make a sufficient edge.
Verified purchase: Yes | Condition: New
Only used the larger of the 3, not too impressed with the quality. Material used for the bolt just mild steel. One leg slightly longer than the other 2 so didn’t pull straight. Couldn’t find a socket to fit the bolt, 15mm too small, 16mm too big. Did the job, but only just. Will be buying something better in the future. Would recommend spending more and buying something fit for purpose, you get what you pay for.
Verified purchase: Yes | Condition: New
Good budget gear / pulley pulling tool. However, not really suitable as a bearing puller, which is what I should have gone for. I haven't put this under any real load, so can't comment on its robustness.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Pullers & Extractors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Pullers & Extractors
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
