Picture 1 of 5
Stock photo
Picture 1 of 5
Stock photo
Nordstrand 90W Stainless Steel Water Pressure Booster Pump
7
73grahamsmith (131)
100% positive Feedback
Price:
£42.28
+ £5.21 postage
Returns:
Condition:
Power: 90W. Brass body, stainless steel housing. Used – in full working order when removed. Sold as pictured with fittings. Ideal for catering trailer or household water pressure boosting. Key Specifications.
- Buy it nowNordstrand 90W Stainless Steel Water Pressure Booster Pump
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandNordstrand
MPNETP-W90-HIM01
GTIN5055983161502
eBay Product ID (ePID)26027212788
Product Key Features
TypeWater Pressure Booster Pump
Dimensions
Weight3.78kg
Additional Product Features
Custom BundleNo
MaterialStainless Steel
Applicable RegionsBathroom
Ratings and reviews
Most relevant reviews
- 27 Feb, 2019Most favourable review
Good value pump
This pump was fitted to a single kitchen mixer tap that had poor flow from a gravity fed hot water system. The pump transformed the poor flow to perfectly acceptable. The flow switch requires the tap to be turned full on to activate the pump. Anything less and it doesn't activate. Neither does it activate if the cold tap is turned on at the same time, so the tap won't work as a mixer tap.. Sometimes the pump won't activate until the cold is turned on and off again for some reason despite having a check valve fitted in the hot supply. All sounds a little off putting, but in fact we are quite pleased with it once we got used to the quirks. The pump is mounted on the rear of the sink cabinet, connected by flexible pipes and is clearly audible in the adjacent room when working but not annoyingly so. Reliability unknown as it's only been fitted a short while.Verified purchase: YesCondition: New
- 08 Oct, 2019Most critical review
just not powerful enough.
My flat has a cold water tank that is only at head height, so the hot water pressure is very low and isn't enough for a mixer tap. I bought this pump to raise the pressure at my kitchen sink, so that I could use a mixer tap and an instant water heater but it failed to raise the pressure enough to set off the water heater which only required 0.6 Bar to operate. This pump was rated at 1.0 Bar but it didn't reach this pressure at all, so the entire system had to be scrapped.Verified purchase: YesCondition: New
- 16 Aug, 2017
Very good pump for the money
This pump was used to for boosting the pressure of the hot water pressure in my bungalow which has very low water pressure on the hot water system due to the storage tank being only 2 ft above the highest tap outlet. The pump sends plenty of water to the taps now and is quite quiet in operation. This is very noticeable as the previous pump was an AC brushed motor and was very noisy. This one, being an induction motor, only produces a low pitched hum. Not sure why the inlet and outlet of the flow sensor are different sizes or what the supplied adapter is for, but a simple 12mm to 15mm adapter sorted the problem.Verified purchase: YesCondition: New
- 25 Jan, 2023
Satisfied
Only real issue concerns the pipe connections which are of BSP thread but parralel, not tapered (external), and with un-machined internal bore, so unable to take pipe + olive; so very difficult to achieve a water tight connection. In operation, found it impossible to stop the pump from cycling on & off after kitchen tap turned-off (having followed the good instructions for dealing with this problem); this is possibly due to kitchen tap having very small bore supply pipe causing too much back pressure hence stopping the pump shut-off valve from operating properly. We now keep pump switched-off except when running bath/shower. Over-all.........satisfied.......wait to see what life expectancy will be! G.W.Verified purchase: YesCondition: New
- 08 Jan, 2025
Excellent. I always use this brand of pump.
I have used these pumps to boost the hot water pressure in a number of houses. They are simple and reliable and offer excellent value for money. The installation is straightforward and the instruction manual is clear.Verified purchase: YesCondition: Pre-owned
- 10 Mar, 2019
Mmmm
I use the pump to move water from my water butts which it does well the pressure set part does not work as the pressure is to low it states this in the manufacture instructions so can't complain the pump gets really hot with use really hot would not use it in a houseVerified purchase: YesCondition: New
- 07 Sep, 2017
Seems to work fine.
Wanted a pump to increase flow from the water butts to car wash brush. Works well and has certainly increased pressure. Not really enough for a hard spray but does for a wash off spray. Works well with the brush though. Auto stop works fine. Time will tell in longevity if life.Verified purchase: YesCondition: New
- 26 Jul, 2017
easy to fit pump
Fitted two pumps now and works well on both . I used them in blocks of flats where there is a drop in pressure at 2nd floor . Boosted from 2ltrs per min to about 8ltrs a minute. Would highly recommend.Verified purchase: YesCondition: New
- 09 Aug, 2017
Robust Pump
While I have no in service experience of this pump, it appears to be robust with a well-made, of substantial heavy weight design. This is not a flimsy plastic pump. It also comes with a good quality demand valve which can be used (or not) to switch the pump off automatically when not in use.Verified purchase: YesCondition: New
- 12 Nov, 2020
needs to made more versatile
I have not yet installed it because I have a limited space to place it. I needed a flow from right to left and it has made finding connections difficult, well as yet I have not found suitable fittings. The design should be change to 4 point assembly fittings to allow the nozzles to be rotated. Looking for fittings it was suggested that the inlet/outlet bores should be to suit a 20 outside diameter tube.Verified purchase: YesCondition: New
