 |
Used it today on MGA dashboard -looks brilliant! But, instructions are a bit unhelpful. Says paint needs 48 hours to dry. But, also mentions heating to cure to get the effect. Are these options? Bless You-tube chaps, suggestions that for best results do the 3 coats, wait one hour, then use hot air gun to create the wrinkles. It worked brilliantly! Maybe some improvements in on-can instructions?
Verified purchase: Yes | Condition: New
I used this product years ago on a few occasions with very pleasing results every time. Something has changed, resulting in poor, uneven and uniform finish. Both attempts had to be stripped back to bare, shiny and very clean metal. I followed the directions exactly and to the letter. I have lost all confidence in this product and wonder what to do next to get the results I need. Unless improvements are made, I certainty would not recommend.
Verified purchase: Yes | Condition: New
I've been using this paint a few years now and it never dissapoints. Excellent 'factory fresh' finish every time and lasts really well, even on engine parts subjected to moderate heat. Preparation is important but application is easy and non-fussy. Takes a while to cure but can be speeded up by baking on. Recommended.
Verified purchase: Yes | Condition: New
super paint you MUST apply it at the correct temp range and you should get a super finish ensure you invert the can and spray out the residue else it will clog the jet and the can will be useless
Verified purchase: Yes | Condition: New
It's black, it covers well, and it wrinkles. The only downside..........the aeorsol nozzle is is extremely messy. Next time I'll use an aerosol trigger attachment.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Engine Mounts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Engine Mounts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
