Skip to main content

Picture 1 of 12

Stock photo
Stock photo
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 1 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 2 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 3 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 4 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 5 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 6 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 7 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 8 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 9 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 10 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 11 of 12
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA - Picture 12 of 12

PHASE II 251-111 100WST 6 Pieces Wedge Q/C Tool Post Set with Lathe Swing 9"-12"

4.733 product ratings
LEFCO Supply (72829)
100% positive Feedback
Price:
US $299.95
Approximately£221.64
+ $65.33 postage
Estimated delivery Mon, 4 Aug - Fri, 15 Aug
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
New
This design is based off of the Aloris AXA series and is sized to fit lathes with a 9"-12" swing. This is the more accurate wedge style, not the cheaper piston model.

About this product

Product Identifiers

BrandPhase II
MPN251111
Ean0094724670106
ModelSERIES 100
eBay Product ID (ePID)3031758577

Additional Product Features

Custom BundleNo

All listings for this product

Buy it now
New
PHASE II 251-111 100WST 6 Pieces Wedge Q/C Tool Post Set with Lathe Swing 9"-12"
item 1 PHASE II 251-111 100WST 6 Pieces Wedge Q/C Tool Post Set with Lathe Swing 9"-12"
£58.48
+ £62.60 postage
Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA
item 2 Phase 2 II Quick Change Tool Post Set 5 Holders Wedge Style 251-111 Aloris AXA
£221.64
+ £48.27 postage
PHASE II 251-111 100 Wedge Type Quick Change Tool Post Set
item 3 PHASE II 251-111 100 Wedge Type Quick Change Tool Post Set
£332.08
+ £334.81 postage

Ratings and reviews

Learn more
4.7
33 product ratings
  • 24 users rated this 5 out of 5 stars
  • 8 users rated this 4 out of 5 stars
  • 1 users rated this 3 out of 5 stars
  • 0 users rated this 2 out of 5 stars
  • 0 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 26 reviews
  • by shark762
    04 Jul, 2016

    Review of the Phase II Toolpost

    After a very fast delivery I received a well packed toolpost with an assortment of toolholers. The toolpost is well machined and fits well. The assortment of toolholders provides a wide range of capability. In this case, the toolpost has been fitted to a Southbend 10K lathe. The operations performed using this toolpost have benefitted from an increase in rigidity. Tool changes have also been made quicker and more consistent. So far, the improvements have resulted in particular improvements in threading operations and surface finish. I have yet to identify an operation that this toolpost impacts negatively. My experience has been very positive.

    Verified purchase: YesCondition: New

  • by maxfab
    31 Jul, 2019

    Decent tool for little money.

    For the money this is a good buy. I've only just begun to use it on a small lathe I recently purchased. No issues to speak of as yet. The blank for the key way on the cross slide needs to be longer. If I was to use what they supplied the clamping force would be half of what the cross slide is designed for. With that being said, you're going to need, or have access to a mill to complete the install. Like I said it's a good value if you're trying to save a buck.

    Verified purchase: YesCondition: New

  • by fourchases
    07 Jul, 2017

    Tool holder upgrade

    I viewed a YouTube video where a guy converted his vintage lathe over using this quick change tool holder set. I have a smaller Logan 200 and converted from the lantern style tool holder just like he did. You have to machine one part to fit the specific machine you have but that went fine. These are much more stable than the old set up and based on my hands on work with them, the quality is very good.

    Verified purchase: YesCondition: New

  • by a8SIKpdcRfm@Deleted
    12 Jun, 2018

    Worth the money.

    Phase II quick change tool posts are "good enough" quality. My crude description is that they are on the "top of the heap" of Chinese tools. For guys like me that are retired and not likely to wear out a tool post on my little basement lathe, they are perfect. Not too expensive and well enough made that you won't be sorry you bought one. Anybody on a budget will not be disappointed with Phase ll.

    Verified purchase: YesCondition: New

  • by arnieitz
    18 Apr, 2017

    Phase II AXA Tool Post Set

    After watching u-tube reviews I decided on the Phase II tool post set. The price for the set was excellent. Quality of the unit looks & feels good. I mounted it on a Emco Maximat V10. I machined the included block to the shape of the existing lantern bolt and the tool post fit right on. For around $200 this set is a very good value.

    Verified purchase: YesCondition: New

  • by 2002vic
    12 Sep, 2018

    Seems To Be A Good Value

    This item seems just about as well made as my similar Dorian Tool item that is 4 times the price. For my occasional use I hope the Phase II will hold up as well as the Dorian. The tool holders interchange as they are supposed to.

    Verified purchase: YesCondition: New

  • by mikwalke-49
    26 Sep, 2017

    Know what you're up against

    Had to modify my smithy base more than expected based on how it was made. No real problem, but different than anything I'd seen on you tube. I had to weld the center stud to the bottom of the smithy base. Love the quick change base.

    Verified purchase: YesCondition: New

  • by jroncallo
    09 Mar, 2018

    Excellent product

    Works very well. I purchased 4 extra holders for all my cutting tools. Really saves time and adjustment is real easy.

    Verified purchase: YesCondition: New

  • by coastal10188
    04 Jun, 2020

    Solid Build - NIce Fit and Finish

    Solid unit, nice fit and finish. All the parts fit well and have held in place securely when locked in place with the top mounted lever. The leveler adjustment works well on the unit, for centering the tools. The tool holders are all good quality, have used them all expect the knurling tool.

    Verified purchase: YesCondition: New

  • by mmec_us_jgco50djv
    25 Mar, 2021

    Would recommend the wedge type tool post and phase 2 quick change tool post set has what you need.

    Every thing is here for the hobby turner. Just machine the t nut for post or have a local machine shop do it for you . Holders locked up tight on tool post and adjusting for center of cut is so simple.

    Verified purchase: YesCondition: New

You may also like