Picture 1 of 14
Stock photo
Picture 1 of 14
Stock photo
Parker PPC-50 50Amp Plasma Cutter
ParkerBrand (46300)
99.3% positive Feedback
Price:
£127.01
Ships today if you order in the next Ships today if you order in the next 4h 14m
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Condition:
Matter changes by introducing energy, such as heat, from one state to another. For example, water will change from a solid (ice) to its liquid state when a certain amount of heat is applied. If the heat levels are upped, it will change again from a liquid to a gas (steam).
- Buy it nowPlasma Cutter 50 Amp 230V Inverter Metal Plasma Cutter Max Cutting Thickness 12M
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandParker
MPNPPC50
EAN0611355009985
GTIN0611355009985
UPC0611355009985
eBay Product ID (ePID)4027206139
Additional Product Features
Custom BundleNo
Ratings and reviews
Most relevant reviews
- 08 Dec, 2019
Didn't work for long...
Bit late in making this review. Bought this thinking it would be better than the chinese no name cutters. Well it wasn't.. It cut 3 small bits of steel then stopped working. Power on, air going, but no plasma arc, even on direct contact with the damm ground clamp, NOTHING..Checked, rechecked, changed tips, nothing. Sent it back, lucky i was still within the 30 days returns. Maybe I was just unlucky? But it puts me off buying again..Verified purchase: YesCondition: New
- 21 Dec, 2019
This 50amp plasma cutter is a great machine
I ordered up this 50amp plasma cutter & it was soon delivered, I opened up the box a found it to be well packed, on removing the contents of the box, there was a good supply of consumables, cutting torch, earth clamp, air regulator & the fittings to connect it up including the worm drive clips, instruction & spare parts book, I started building up the air regulator, firstly fitting the mounting bracket below the large nut on top of regulator & tightened it up, then added some PTFE tape to one of the brass male fittings & screwed the male fitting into the out side of the regulator, then added PTFE tape to my male quick release fitting & screwed that in to the inlet side of regular & tightened up, then added PTFE tape to pressure gauge & fitted to regulator then fitted complete unit to plasma machine on left hand side (when viewed from front) on the 2 screws provided, this is where I would have a criticism, you have to supply approximately 300mm (12") of air line hose to connect from the air outlet on regulator to the air inlet on the back of machine, (reference picture 1) I then connected up the air line, plugged into 16amp supply & turned on the plasma cutter, set air pressure on regulator to 50 psi & set the amps to 15, put on my auto darkening welding shield & started to cut a piece of 3mm m/steel plate, found I needed more air turned up to 65psi & away I went, not the cleanest of cuts, but not bad for first time, I decided to up the plate thickness to 8mm & set amps at 30 & up the air pressure to 70psi, away I went through the 8mm plate, nice clean cut & quite smooth finish very pleasing, tried cutting 12mm plate at 35amp same pressure, even better than the 8mm plate, very impressed so far, I then tried 16mm plate at 40amps & same pressure 70psi with good results, almost cut completely through, I think with a little fine tuning it would definitely cut 16mm mild steel plate, This is a impressive machine, & I would definitely recommend this 50amp plasma cutter to any one looking one, it is very good value for money & a very well made & finished machine, photo 2, the cut on 12mm plate, Keith NI
Verified purchase: YesCondition: New
- 20 Jul, 2019
Budget cutter
I found that the air regulator bracket doesn't fit the regulator and even if it did there doesn't seem to be anywhere for it to fix to the machine itself so it's just dangling around. It cuts metal though so does the job.Verified purchase: YesCondition: New
- 20 Mar, 2021
Plasma cutter!
Amazing, had to turn it right down, it isn’t shy about cutting through sheet steel! Would recommend, also bargain price!Verified purchase: YesCondition: New
- 24 Jun, 2020
Excellent
It is easy to set up and easy to useVerified purchase: YesCondition: New
- 21 Nov, 2019
50A Plasma
Just cut through 10mm steel without issue. Great price.Verified purchase: YesCondition: New
