CURRENTLY SOLD OUT
About this product
Product Identifiers
BrandWhirlpool
eBay Product ID (ePID)6023880761
Product Key Features
TypeRepair Kit
Ratings and reviews
Most relevant reviews
- 16 Jul, 2019
Good Kit and professionally put together
Did the job. The control board worked 1st time and saved over 200 euro. To do the repair you will need some soldering skills. A de-soldering tool or a method to clear the solder from the joints. If possible a low voltage soldering iron so mains leakage currents do not damage the control board. The repair took me about 1 hour. The components were well labelled and the instruction where very specific and clear. Most of the replacement components are better than the original.Verified purchase: YesCondition: New
- 12 Oct, 2017
Repair Component Kit for Whirlpool Control board Front Load Washing Machine
The product was as described with ALL the electronic components that you require to repair a faulty control board that had "No power at turn on", for the listed boards. As to the value of the Kit, I felt that the actual component cost was a bit high, as most items cost less elsewhere, except having to buy in lots of 5 or more, so it convenient kit for one repair. Replacing the faulty components is a little bit tricky, as you have to carefully remove the protective varnish to solder. A suggestion that I used to make this easier, was to carefully use a small hobby rotary tool, with a wire brush, to remove the varnish. A big note, be careful not to remove the board material or the solder and "hole pad'. It was recommended to replace ALL components as supplied, which if you do not know how to fault find is a very good idea. I would recommend this kit for the repair of the fault as described in the item's listing. Thank you for reading and good luck with your own repairs.Verified purchase: YesCondition: New
- 15 Feb, 2022
The best DIY repair kit!
Sorry that I forgot to write a review in time...My laundry machine is working perfectly since one month ago. Thank you for the kit. I noticed that most of the parts are with increased power dissipation (resistors). I hope it will run till it get totally consumed by the rust :-) The only issues I had were with removing the brown coating over the PCB when unsoldering the old partsVerified purchase: YesCondition: New
- 30 Oct, 2018
Result:A working machine!
I just spend 10€ and saved 450€ for a new washing machine. Machine was completely dead. All the described parts was burned up. Very good instruction and manual. No problem at all. Print board is soldered very well so I recommend to cut the defective components out before starting to clean the solder holes with a good solder suction. Good to know that the new parts have better specs than the original ones.
Verified purchase: YesCondition: New
- 08 Apr, 2018
Great kit! Got my machine running in no time.
This kit's components were, clearly, carefully selected and some are even of greater tolerance than that of the originals. In my case, I didn't need to replace the diodes nor the varistor (after careful checking), which means that more than one failure scenario is covered. It comes with full, clear written instructions with colored photographs of how to assemble the components to the board. To avoid mistakes, every component is labelled. Not least important: this kit saved me 180€!Verified purchase: YesCondition: New
- 27 Jun, 2017
Absolutely brilliant.
Worked like a treat to get my dead Whirlpool machine back into action. The old components were a pain to get out of the board, mainly because there are solder points on both sides of the pcb. But a bigger iron would have made it easier. But as the know how and the parts are concerned, this solution was spot on and rescued my machine for next to nothing.Verified purchase: YesCondition: New
- 11 Oct, 2020
We have lights!!
An hour or so with the soldering iron and we have lights again! Components came labelled and the instructions are written written and with a clear picture of where to make replacements. Highly recommend giving this kit a try.Verified purchase: YesCondition: New
- 23 Jun, 2017
Great help!
I was wondering if i could repair mysylf my dead washing mashine. I found this kit followed by very accurate instructions and i manage to replace the faulty components (need some basic electronic soldering skills). Thanks!Verified purchase: YesCondition: New
- 22 Oct, 2017
Saved a lot money
Thank you very much. I managed to repair washing machine myself. The hardest was to remove items from L1373 microsheme, because I had very simple iron gun, with overheated head. But now washing machine works.Verified purchase: YesCondition: New
- 02 Oct, 2017
Fixed my washing machine
The kit is complete, the parts are clearly labeled, and the instruction is good. It was a bit of work to get the old components off, but overall this was a good way to fix my washing machine.Verified purchase: YesCondition: New
