Check the item description to confirm this fits your vehicle

Picture 1 of 3

Stock photo

Opel Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Spline Tool - Picture 1 of 3

Opel Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Spline Tool - Picture 2 of 3

Opel Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Spline Tool - Picture 3 of 3

DR TOOLS Suspension Tool for Removing and Installing Rear Trailing Arm Bushes

4.36274 product ratings

ar_dr_trading (14340)
96.4% positive Feedback

Price:

£7.79

+ £2.79 postage

Estimated delivery Wed, 1 May - Thu, 2 May

Returns:

14 days return. Buyer pays for return postage.

Condition:

New

33 spline Alternator Clutch Free Wheel. Pulley Center Bolt Removal Alternator Bosch. Fits all alternator clutch pulley which has 33 splines. Special design to stop the pulley and remove. pulley at the generator.

View all details

All listings for this product

item 1 Citroen Xara Picasso 1.7 1.8 16V Flywheel Petrol Engine Timing Lock Tool
£7.99
Free postage
item 2 AUDI FORD PEUGEOT VW Alternator Clutch Free Wheel Pulley Removal Wrench Tool 33
£7.79
+ £2.79 postage
item 3 TOP QUALITY ALTERNATOR CLUTH FREEWHEEL PULLEY REMOVAL TOOL 33 TOOTH SPLINE TEETH
£7.79
+ £2.79 postage
item 4 Opel Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Spline Tool
£7.79
+ £2.79 postage
item 5 Renault Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Splines Tool
£7.79
+ £2.79 postage
item 6 Pro Alternator Clutch Free Wheel Pulley Removal Tool for VW AUDI FORD PEUGEOT
£7.79
+ £2.79 postage
item 7 Suzuki Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Splines Tool
£7.79
+ £2.79 postage

See all 669

About this product

Product Identifiers

Brand
DR TOOLS
MPN
FIESTA1
GTIN
3696893325831
UPC
3696893325831
eBay Product ID (ePID)
788957688

Product Key Features

Placement on Vehicle
Rear, Left, Right

4.4

4.4 out of 5 stars based on 274 product ratings

274 product ratings

196 users rated this 5 out of 5 stars
35 users rated this 4 out of 5 stars
8 users rated this 3 out of 5 stars
15 users rated this 2 out of 5 stars
20 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 175 reviews

4 out of 5 stars
by stevie-johno229 Apr, 2020
Most favourable review
It worked for what I needed to do
It did the Job,although it was a bit hard as the position I needed to use it was awkward,I had the hub off the car.The cups fit very well and the addition of the little bearings is a nice touch but they collapsed when I was fitting the bush as I had to use a hell of a lot of force to get the bush to move, because of the shape of my trailing arm the reciever cup wouldnt sit square so I had to keep repositioning it. In all honesty I dont think any bushing tool would have performed any better, I have the other arm to do so will try to get pictures and amend this review...I shall freeze the next one to see if it makes it easier on the tool...would I recommend it...yes...nothing is easy when replacing bushings but this did make it easier, I doubt it would have removed my bushing as I had to cut them down the length in 2 lines..and they were 18yrs in the car and rustedRead full review
Verified purchase: Yes | Condition: New
1 out of 5 stars
by biospherebaby08 Nov, 2020
Most critical review
Rough but not ready
Tool worked OK for bush extraction, but one of the washers shattered. Cup receiver side relief was too small and required an additional 5mm machining off. Insertion cup internal ID too small to accept rubber seal on bush. 1mm machined off internal ID. Insertion cup internal shoulder ID too small to fit over bush and engage bush shoulder. 1mm machined off. Original finish on all cups very poor with heavy chatter from machining. Original finish cut one of the rubber seals before re-machining.
Verified purchase: Yes | Condition: New
3 out of 5 stars
by wombatcurry16 Feb, 2021
OK but.....
I bought this to use on a Volvo S80 D5. The tool is sturdy, the original crank pulley bolts are long enough to hold the tool, the slots are a bit loose but all fits. The real issue is that, on the S80 at least, the crank dimensions of the tool place it exactly in the wrong place in 3 of the 4 possible positions with the engine at TDC. Vertically upwards it fits - but then you need to get a lever on it squeezed down by the cam belt (a motorcycle fork keg works well!) Horizontally towards the front it fouls with aircon or oil cooler pipes. Horizontally to the rear it fouls with the suspension/driveshaft. Vertically down it fouls with the subframe. Were the crank dimensions slightly greater then at least two more options would be available. I await to see what it’s like on my V70 when the time comes.Read full review
Verified purchase: Yes | Condition: New
2 out of 5 stars
by gareth314614 Jun, 2017
puller
The tool removed the old bush great but when it came to installing the new bush there was a major design fault. The area of the tool that pushes the new bush in has a chamfer machined on it, this means that it slips of the bush, if it had a square face it would locate better. had to strip the whole rear subframe out and use the garage press.
Verified purchase: Yes | Condition: New
3 out of 5 stars
by srt1429214 Feb, 2019
Cheap, misaligned and needs modifying
See picture, the bolt holes do not line up. Had to enlarge the boltholes to 10mm and the dowel hole to 4mm to be able to fit this properly in all 4 bolt holes. The tensioner tool pins are also made of cheese. Bent off in an odd direction as soon as you try and use it. All in all. It does the job. Providing you can make the much needed mods and only need to use it once (the tensioner tool) but if you are looking for a hardy piece of kit for regular use. Don't bother.
Product reviews images
Verified purchase: Yes | Condition: New

Best-selling in Frame Rails & Subframes

Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Frame Rails & Subframes

DR TOOLS Suspension Tool for Removing and Installing Rear Trailing Arm Bushes
4.4 out of 5 stars based on 274 product ratings
£7.99 New
---- Used

Save on Frame Rails & Subframes

Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Frame Rails & Subframes

Ford Rear Axle Suspension Bush Install Removal Pressing Mounting Puller Tool
£23.99
Trending at £45.99
Meyle 714 710 0006 Mounting, axle beam
£14.49
Trending at £21.76
FIAT DOBLO REAR AXLE CONTROL TRAILING ARM WISHBONE BUSH REMOVAL INSTALL TOOL
£119.99
Trending at £121.84
For FORD MONDEO MK4 2007> FRONT TOP SHOCKER STRUT MOUNTING & BEARING KIT Karlman
£29.90
Trending at £55.98
Meyle - 314 741 0004 - MEYLE-ORIGINAL Quality Repair Kit, suspension strut
£12.90
Trending at £14.43
For FORD TRANSIT CONNECT 13> FRONT SUSPENSION TOP STRUT MOUNTINGS & BEARINGS X2
£34.00
Trending at £40.44

Shop by category

Picture 1 of 3

DR TOOLS Suspension Tool for Removing and Installing Rear Trailing Arm Bushes

All listings for this product

item 1 Citroen Xara Picasso 1.7 1.8 16V Flywheel Petrol Engine Timing Lock Tool

item 2 AUDI FORD PEUGEOT VW Alternator Clutch Free Wheel Pulley Removal Wrench Tool 33

item 3 TOP QUALITY ALTERNATOR CLUTH FREEWHEEL PULLEY REMOVAL TOOL 33 TOOTH SPLINE TEETH

item 4 Opel Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Spline Tool

item 5 Renault Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Splines Tool

item 6 Pro Alternator Clutch Free Wheel Pulley Removal Tool for VW AUDI FORD PEUGEOT

item 7 Suzuki Alternator Clutch Free Wheel Pulley Removal Wrench 33 Teeth Splines Tool

About this product

Product Identifiers

Product Key Features

Ratings and reviews

Most relevant reviews

It worked for what I needed to do

Rough but not ready

OK but.....

puller

Cheap, misaligned and needs modifying

Product reviews images

Best-selling in Frame Rails & Subframes

DR TOOLS Suspension Tool for Removing and Installing Rear Trailing Arm Bushes

Save on Frame Rails & Subframes

Ford Rear Axle Suspension Bush Install Removal Pressing Mounting Puller Tool

Meyle 714 710 0006 Mounting, axle beam

FIAT DOBLO REAR AXLE CONTROL TRAILING ARM WISHBONE BUSH REMOVAL INSTALL TOOL

For FORD MONDEO MK4 2007> FRONT TOP SHOCKER STRUT MOUNTING & BEARING KIT Karlman

Meyle - 314 741 0004 - MEYLE-ORIGINAL Quality Repair Kit, suspension strut

For FORD TRANSIT CONNECT 13> FRONT SUSPENSION TOP STRUT MOUNTINGS & BEARINGS X2

You may also like

Trim Removal Tools

Vehicle Dent Removal Tools

Unbranded Radio Removal Tools

Car Radio Removal Tools

Vehicle Radio Removal Tools

Volkswagen Car Radio Removal Tools