Picture 1 of 19

for Land Rover FREELANDER 1 Window Regulator With Motor Rear Right Cvh101202

4.65 product ratings

partshop888 (3582)

99.3% positive Feedback

Price:

£26.99

Free delivery in 1-3 days

Estimated between Thu, 2 Oct and Sat, 4 Oct

Ships today if you order in the next Ships today if you order in the next 6m 19s

Returns:

30 days return. Seller pays for return postage.

Condition:

New

CVH101202, CVH 101202, CVH101212, CVH 101212. Land Rover Freelander L314 [1998-2006] SUV 2.5 V6 4x4 2497ccm 177HP 130KW (Petrol). Land Rover Freelander LN [1998-2006] SUV 2.0 TD4 4x4 1951ccm 112HP 82KW (Diesel).

Ratings and reviews

Learn more

4.6

5 product ratings

3 users rated this 5 out of 5 stars
2 users rated this 4 out of 5 stars
0 users rated this 3 out of 5 stars
0 users rated this 2 out of 5 stars
0 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

by kai_57
03 Jul, 2017
Works perfectly
There are no instructions with the mechanism so here goes a brief overview of the replacement process. 1) Remove door card - unscrewing the 3 handle screws and door release cover screw, don't break the push clips. 2) Access the mechanisms 3 x securing bolts by carefully removing plastic splash guard 3) Secure the window glass with duct tape over the top of the door frame and unscrew the 3 bolts securing the Window regulator mechanism. 4) Remove the 10mm bolt (inside the door panel securing the glass to the lifter mechanism - this can be tricky) as you need to get a hand inside the door panel to access with a 10mm spanner, this will be just below the door release lever, fingers will help to locate this, then remove 10mm bolt and power connector from the old motor. 5) Spend 15 minutes figuring out how to remove the faulty window mechanism through the very small aperture. 6) Reverse the newly acquired removal technique to re-install the new unit through the very small aperture and attach the power to the motor. 7) Attach the motor control button from the door card and slowly raise/lower the mechanism to align 10mm window securing bold - hint - there is a small rounded slot approx. 15mm x 6mm just below the door release lever that you can see the bolt hole within the door panel that needs to be re-attached. 8) Carefully lower the window glass so that it lines up with the bold hole that is now visible, and re-insert the 10mm bolt, DONOT over tighten this.... 9) Secure the splash panel back to the inner door skin with a bit of the remaining duct tape. 9) Disconnect the windows raise/lower button and feed the cables through and re-install door card, handle and screws.
Verified purchase: YesCondition: New
by amagyeman13
15 Sep, 2023
Right rear window motor for freelander 1
Was good for what was expected 👌
Verified purchase: YesCondition: New
by arrinalex
07 May, 2024
Good product
Good product
Verified purchase: YesCondition: New
by amk0755
08 Jul, 2020
Good
Good value
Verified purchase: YesCondition: New