 |
The pump is of excellent quality. The valve attachment is unusual but very easy to use, doesn't leak, and unlikely to wear out. It fits Schraeder valves, so can also be used for tyres, but does take longer because the pump is designed for high pressure/low volume. I use it with a simple screw-on Presta adapter for my road bike - it generates the required 110+ psi with no problems and is a lot smaller than many other pumps.
Verified purchase: Yes | Condition: New
Says not to exceed 300psi, but i had to go over this to get where i wanted it, not sure of gauge is accurate. The fine tune pressure release is not fine, press it and you will loose all pressure. Great if you want to pump up shock, i wouldent be using it all the time anyhow, just let to much air out one day and had to pump it back up.
Verified purchase: Yes | Condition: New
I bought this accidentally for filling up my tyres, rather than my shock absorbers (I don't have any on my bike!). However, the quality is very good, good build quality and materials. The ability to hand pump to such high pressures is impressive. It takes a little while to pump a full hybrid tyre to 75 psi (~5 bar), maybe around 3-4 mins. But the positive is that it's small enough to fit in my bag or along in a pouch on the bike
Verified purchase: Yes | Condition: New
The Beto air shock pump is designed to pump up air suspension on mountain bikes. This pump is compact and light weight, handy to carry around while on trails ect. The gauge is a good size and displays the air pressure in PSI and BAR and also clear to see, I can't figure out if pressure readings start at 0 though as doesn't show this, as the first number on the gauge is 100psi/5bar. The 2 step valve fitting is really handy and easy to fit the pump to the shock valve without leaking too much air to keep your pressure accurate. The pump handle locks itself onto the pump body when fully pushed in, which is a cool feature so it won't extend while either attached to your bike frame, or carried in a back pack. The handle also folds out 90° to create a "T" shape to make pumping and holding the pump comfortable. The bleed valve operates smoothly so you can achieve accurate pressure while setting up your shocks. The air hose and connectors are pivoted, which is really handy, as you can hold the pump in virtually any position while using it. PROS: Lightweight. Clear display gauge. Pivoted air hose. 2 step valve connector. Lockable pump handle. Compact. Quickly reaches desired pressure. Easy to use. CONS: The only downfall I found is that the gauge doesn't seem to start at 0, and the first digit displays 100psi/5bar, so takes a bit of working out of you need to put less than 100psi/5bar pressure in your shock. CONCLUSION An all round nice shock pump that's lightweight, quick and easy to use. As said before the only let down is the pressure reading display starting at 100psi/5bar, but with a bit of working out (I believe the pressure goes up in 20psi incrediments), you can achieve pressure below those markings. Read full review
Verified purchase: Yes | Condition: New
My only picky item is the dial could be easier to read but I managed
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Pumps
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Pumps
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
