Bought to try & repair a Milwaukee Impact Driver which was fitted with a Defond CGP-1120F 20.1RA trigger switch (18v dc). After some minor alterations to the body of the impact driver using a Dremel to grind out some plastic bits,the switch fitted ok,albeit with some gaps either side of the trigger due to being smaller in width than the Defond switch. The original LED unit was removed & the LED supplied with this generic switch was secured in place with clear silicone mastic-which worked a treat. Impact driver was tested on some fairly large wood screws & removed/replaced them easily. My only concern is the fact that the max current with this switch is 16A & from the research i did on the Defond switch the Defond can handle up to around 30-40A. I did notice the handle warming up so let it cool down before using again.For inserting/removing small screws this shouldn't be an issue but with larger screws if the handle gets warm i would recommend letting it cool down between screws.Read full review
Verified purchase: Yes | Condition: New
The control unit works perfectly. I used it to repair a very old 24v 'Mac Allister' drill, manufactured over 20 years ago. It even provides a work light which the original never had! Not quite a perfect fit for my drill but is the correct shape and trigger design - near enough to work and would be a much closer fit for more recent tools.
Verified purchase: Yes | Condition: New
Einhell want over £30 for a new switch for you to fit with p&p. This is the identical trigger you just have to unsolder the battery connections and connect to your existing ones.
Verified purchase: Yes | Condition: New
Used it to replace the trigger/switch on an Aldi i8v cordless drill, I had to enlarge the gap in the drill case slightly to fit it and solder the connections on to existing motor and battery connection. It now works perfectly, excellent value for under £3. Thanks
Verified purchase: Yes | Condition: New
Slight drill case mod due to size of trigger no problem, snipped off LED light as not required, un soldered battery clip and re soldered original clip and drill works great.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Switch Accessories
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Switch Accessories