Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in HVAC Blower Motors & Wheels
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on HVAC Blower Motors & Wheels
These resistor packs control the intermediate speeds of the heater blower but they don't last forever. In my case it was a 15 yr old Mk1 Focus which was blowing on position 4 only. Remove the glovebox lid (3 screws) and the rear black panel of this pack can be seen, held into a little recess of the plastic bulkhead by a single screw. Beat recognised by the multiplug with four wires. Use a long Phillips screwdriver to extract it and the replacement is a straight swap, slightly fiddly as you have to swap the connectors by feel in a confined space, but I did the job from start to finish in about 20 minutes. All four fan speeds working now!
Verified purchase: Yes | Condition: New
fitted in within 15 minutes,blower now works fine on all 4 settings
Verified purchase: Yes | Condition: New
found this online, good value and delivery. once fitted worked well.
Verified purchase: Yes | Condition: New
Blower only worked on max setting. After replacing with supplied component, now works perfectly on all 4 settings. Thanks
Verified purchase: Yes | Condition: New
Verified purchase: Yes | Condition: New