 |
At 1st I was unsure whether to carry out the work myself, or to employ somebody to do it for me. When I received the product it had step by step easy to follow instructions in how to carry out the preparation and treatment. The process has worked well and appears to have made good the problem, I have also followed further advise that they recommended with petrol treatment so that it will prevent further problems.
Verified purchase: Yes | Condition: New
I have used POR 15 kit to attempt to seal my leaking Suzuki fuel tank. I will not know how successful this repair has been for some time as I am undertaking other work on the bike concurrently. The product was relatively easy to use.
Verified purchase: Yes | Condition: New
The product instructions are comprehensive and if followed exactly will give excellent results. I used this on a thirty year solid but internally rusted motorcycle petrol tank. I found the pre treatment cleaning time consuming but worthwhile, I did this in two stages- first with a handful of gravel and secondly with 40 10mm nuts which gave effective reduction of rust deposits and accumalated debris in the tank. At the final, lining stage of the treatment I was suprised how well the por15 coated the tank and by how much surplus I drained off- it is important to do this to prevent puddling in the tank. The internal lining finish I achieved shows no signs of rust and is a light grey finish I waited five days before using petrol in the tank and subsequent checks have shown no taint to the fuel.Read full review
Verified purchase: Yes | Condition: New
Very easy three steps job. Powerful cleaner removes all the grease and fuel debris. Then a very efective dust remover. In a 22 litre tank, took me about 3 hours to see the metal inside shining again. Finally a clever and easy way to "paint" all the inside with a thick layer of sealer. Just dump in and goes rolling the tank. Four days latter just after the complete dry, i would say better than new.
Verified purchase: Yes | Condition: New
Used this twice. Will be using for another 2 tanks that need the treatment. Amazing the heat generated. You must read the instructions carefully and prepare as once started with the final liner its fast and you can't stop. Think about balance pipes and vents in the tank so you do not block! Ideally do outside on a dull day as the fumes indoors are overpowering. Very pleasing finish and ethanol resistant. Be careful when filling tank with fuel that the nozzle does not scrape the liner.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Rust Prevention
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Rust Prevention
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
