About
All Feedback (885)
- s***a (130)- Feedback left by buyer.More than a year agoVerified purchaseA quality tool at a really good price . The seller was in touch with me due to a small problem regarding delivery of the tool which resulted in a slight delay in the delivery date . I was made aware of the delay and was kept informed of this .
- thecampervanshop (2195)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- sound-deadening-shop (47170)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- auto-connectors (4305)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- b.p.r-trading (451442)- Feedback left by buyer.More than a year agoVerified purchaseTop Ebayer Recomended Fast Payment No Problems Thanks from all at BPR Trading
- powertoolmate (243975)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (8)
02 Jul, 2016
Fantastic heatpipe cooler, highly recommended.
Good:
- Has direct contact heatpipes (similar to ASUS Direct CU coolers) for gaster dispersion of heat
- Took 20 degress C off compared to stock aluminium cooler on Radeon HD 7770.
Bad:
- The provided fan is too big/ thick and doesnt have PWM control, although it is quiet. So the card will take up 3 slots space instead of 2.
- The heatsink takes 2 slots of space on its own.
Conclusion;
This cooler was well worth the money (considering its a universal fit and i can use it on the next card too). It took a whopping 20 degrees C off my GPU temps at idle and load. The card used has a TDP of 80 watts, and the GPU fan would spin up to 80% under full load (playing crysis). Now its just audible. I would say it can handle a card of upto 130W max, so long as the fan is PWM or always running at full speed like the 3-pin chassis fans are). But you could mount an oversized 92mm fan on it (92mm fan with 80mm mounting holes) to provide even better cooling.
I ended up using the original GPU fan as it was PWM direct from the graphics, so the fan speed would increase with temps. Also the original fan was low profile enough to easily fit into the case (micro ATX).
Came with some RAM chip heatsinks, thermal paste. But the fan wouldnt really cool the chips due to their positioning so i never bothered. Also the thermal compound is cheap so dont use it. I used Arctic Silver 5.
I have ordered the 120mm version now (K120), and a 140mm oversized PWM fan (140mm fan on 120mm mounting holes). The idea being that i will wire the PWM fan with a mini 4-pin connector and connect to the existing graphics card connector. Will be reviewing that when i test it out on a higher end graphics card.
But this one is EPIC!!! And i would highly recommend it if you are willing to pay the price. But just make sure you have at least 3 slots worth of space free.
20 Sep, 2016
Good fan but be prepared for the noise.
I purchased 2 of these fans for my gaming pc. First impressions were excellent. The build quality is fantactic, the fan feels premium. Installation was easy, the fan comes with small threaded screws (not a standard thread) so you cant use standard chassis fan screws. The canbles are sheathed which is nice. It comes with 2 adapters to lower the speed and noise.
Thats where the 1st issue is, the silent adapters are not PWM, so you end up with a single speed 3-pin fan that runs slower. The 2nd issue is the noise. Without the silent adapters the noise was way too loud (close to the loudness of a vax silent vacuum cleaner) NOTE I HAD 2 OF THESE INSTALLED. Even after setting the pwm fan control settings on my ASUS ROG motherboard to silent, it was still unbarable.
Then i had to resort to the silent adapters, i fist tried the 1200rpm adapter which was still too loud, then i tried both 1600rpm and 1200rpm adapters together. Only then was it as quiet as the fans that i was replacing.
The only reason i purchased these fans was to have PWM operation and the red leds. However due to the extremely high noise these fans make i had the resort to using the silent non-pwm adapters (both together make the fans run at 850rpm) and due to the lower speed the LEDs are not as bright :( and the airflow is the same if not lower than my original.
So to summarize, for me they turned out to be overpriced but good looking fans which failed to meet my expectations. The Chart saying how quiet the fan is at 1200rpm is a lie, it seems much louder than the stated 19db.
However if you dont care about noise, then this fan is the one for you, i have not come across a fan with such high airflow (over 90cfm according to the specs), and you really do feel it when its running at high speed.
07 Sep, 2016
Gets the job done.
This shoe rack is very basic in design. Its made of metal "rods" which are bent into shape, spot welded and then plastic dipped. The finish is therefore smooth and fairly durable.
It looks basic, more FUNCTION over FORM. There are no screws, it just assembles by slotting the shelves onto the sides. Strong enough to hold all the shoes you put on, so it gets the job done.
For the price, i would say its good value for money.