About
All Feedback (1,577)
- accuratearmspa (16443)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- oceanztreasurez (3958)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- nicksonato (7598)- Feedback left by buyer.More than a year agoVerified purchaseSuper fast payment, great Ebayer! Follow our store for more great deals
- j2themft123 (19871)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- simpras (8692)- Feedback left by buyer.More than a year agoVerified purchaseExcellent Transaction! Thank you!
- jwsattic2015 (30656)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (5)
04 Jun, 2024
Cripe is always the best and the tool is the best too!
Cripe is always the best and the tool is the best too!
15 Aug, 2017
Fine finishing broom
1 of 1 found this helpful All my Kraft concrete tools are excellent and this broom is no exception. It is well made out of excellent products. The fibers are strong and soft. They give a very nice fine broomed finish to concrete. The fibers don't break or fall out. The wood is strong and well finished. When a fine finish is needed, this broom is perfect.
29 May, 2018
First Time Washer Rebuild!
This kit is excellent. It includes everything from the transmission to seals and bearing. The job of replacing the transmission is a big one! It requires 'Seal Nut Removal Tool and Hub Spanner Wrench for Maytag Washing Machine' with the adaptor, at least for my Maytag machine. The most important thing to remember in doing the job is to make sure that the correct bolts go in the correct places. There are two sets of four bolts in the job. One set of bolts is larger diameter than the other. The larger ones will cut threads into the smaller, incorrect hole location and if this is done, it ruins a $100 part! So be careful! Probably good to take photos of where the bolts came from so as to avoid confusion on the rebuild. Then new parts come pre-greased. My machine runs like new! It was a big job... I definitely recommend cleaning all the used parts that will be put back together... do not put new parts onto dirty parts in the rebuild...