About
All Feedback (1,148)
- andcar-4700 (404)- Feedback left by buyer.Past monthVerified purchaseFast Payment excellent buyer
- fairprice86 (42653)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- lmelectrical (2340885)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you from all at LM Electrical.
- ecommegamartuk (226)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- swanseabayrentals (4107)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- dariusz89_2012 (2383)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat buyer. Thank you for smooth transaction.
Reviews (7)
03 Jan, 2018
Doesn't work unfortunately
0 of 2 found this helpful I went by the instuctions 1:1 and the product simply doesn't work, small hole on one of my lower tooth, mixed as per instuctions, applied as per instructions, and allowed more than enough drying time as per instructions... but after that the stuff instantly washes away, i tried thickening the mix up which improved - but again, the stuff fell out as soon as i ate something.
Find a better product
26 Jun, 2023
Bad bottle, won't last, glue works alright
Very very thin glue which makes application difficult (it just runs everywhere you don't want it) but if you do manage to get it where you want it'll stick it.. It mentions using "the pin on the oppsing side of the lid" but there is no such pin so you'll have to find a small sewing pin or a very small nail to pierce it yourself which is annoying. The is no metal insert in the lid to prevent the nozzle from getting blocked like you'd get on the more premium brand glues so expect this tube to get blocked up frequently. The top is not a screw cap but a loose press fit so expect this whole bottle to turn to stone in the weeks or months making buying a bottle pointless....
29 Feb, 2020
Not as advertised
1 of 1 found this helpful While this stuff kinda works in big volume (huge globs) it doesn't work in thin or small volume. It's like and has the consistency of silicone mixed into a regular epoxy... it gets firm after curing but never truly goes hard and always has a slight sponginess to it. It has poor adhesion to pretty much all surfaces, i was trying to use this for PCB pad repair and attempting to bond flat copper to a fiberglass board... Two of the materials it claims to excel at on the front of the packet, after leaving to cure for over 24 hours I tapped the copper pad with a temp regulated soldering iron at 200c and in less than a second the bond broke down and the copper was gone... i did another test, i put a huge blob on a surface, allowed to fully cure, then using a hot air gun set to only 150c at medium airflow and within seconds the adhesive broke down, tapping it with a toothpick it just flaked away, after there was no indication a bond was ever there....this is false advertising at it's best and it doesn't even outperform even the cheapest of epoxies in regards to temperature tolerance and it especially falls flat on it's bonding ability. I think they either have to change their packaging and marketing to be more truthful about their product or they need to alter their formulation....adding an etchent would be a step in the right direction. atm a waste of time and money.