About
All Feedback (1,837)
buy_gadgets (1274223)- Feedback left by buyer.
Past 6 months
Verified purchase
fast payment, valued customer, pleasure to deal with. Thank You buy_gadgets
kybernet-ltd (17926)- Feedback left by buyer.
Past 6 months
Verified purchase
Truly valued customer. Prime buyer! Thank you for buying from Kybernet ltd
premier_seeds_direct (697366)- Feedback left by buyer.
Past 6 months
Verified purchase
A trusted and valued customer A++ of Premier Seeds Direct
aqua_boiler_spares (2375)- Feedback left by buyer.
Past year
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
nigejone_92 (2747)- Feedback left by buyer.
Past 6 months
Verified purchase
good ebayer cheers
ukgoodhealth2u (10039)- Feedback left by buyer.
Past 6 months
Verified purchase
Your regular orders are highly appreciated - thanks!! Top eBayer!
Reviews (2)
03 May, 2017
Moulded plastic net shuttle needle with no finishing to remove burrs
Craftsmen with any sense of pride should not put their name behind this product in its raw state.
This net shuttle needle requires a significant amount of sanding down in order to remove the factory moulding burrs otherwise it will catch and/or the sharp edges will fray the cord/string netting that you're working on.
The blue needles sold by other sellers are better in that regard.
03 May, 2017
Bracket works as advertised (so far) but the mounting hardware is an afterthought.
I purchased two of these brackets for two different LCD TVs, a 42inch and a 50inch.
No installation instructions are supplied but they are simple enough to figure out.
You will need a 10mm diameter drill bit and a 10mm socket tool or spanner for the 10mm hex wall screws. Do not use a crosshead screwdriver as it requires a very high torque to drive the screws in - a damaged crosshead slot will result if you do.
The supplied 25mm M6 & M8 machine screws that bolt the brackets onto the back of the TVs in combination with the black plastic spacers did not fit either TV.
I had to buy 25mm M5 screws separately to complete the installation.
The supplied small spirit level magnet should not be used as the outer rims of the wall bracket are not flat. The inner edges were reasonable but requires a longer tool to even out the slight imperfections to get a true horizontal level.
To check for levelness, use a proper spirit level on the inner edge of the wall bracket.
The brackets seem very secure, and the tilt function works as intended.
Only time will tell if they are durable enough to last.