About
All Feedback (1,250)
- fancystore2021 (114789)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- *****- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- bhf_shops (839930)- Feedback left by buyer.More than a year agoVerified purchaseThank you for supporting the BHF! Pleasant transaction. Recommended eBayer A++++
- *****- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- bellek (36224)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- aastorehouse (921)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (7)
22 Nov, 2019
Does exactly what it should.
Better than the rare standard 4-Wire Power Adaptor, (using all 8 wires gives half the voltage drop to the CPU making a much more stable supply, especially for the overclockers).
Please do not forget that this Adaptor is not the 4 Wire 4 Pin PSU to 8 Pin CPU Socket which is far cheaper on Ebay, but the 8 Wire 8 Pin PSU to 4 Pin CPU Socket used on older Motherboards.
Better than jamming the 8 Pin PSU Connector on to the 4 Pin CPU Motherboard Connector (where you cannot use the connector locking device and all 8 connections).
Also gives you that little bit of extra cable to neaten up the rest of the cabling.
Overall a useful Adaptor for the professional Computer Builder and Competent Computer Hobbyist.
10 Jan, 2018
Quality tasteful product.
Looks good and not over the top in design, not too big like some that keep bending the top of the tree down, I intend for next year's Christmas to adapt one of these to include some non-intrusive tasteful lights. I cannot fault this product in any way and is very good quality.
03 Mar, 2021
Works just as it should.
It worked just as it should, some come with no instructions about the removal of the transporting pin at the correct time in the setup, I found that it updated automatically after the correct procedure was carried out, my only criticism might be to have a choice of hands for it, costing a little extra depending on what choice one might want other than the standard set sent with the clock module, but one thing I was unable to try was the Manual setting of the clock hands when the clock would have been out of the range of the transmitter.