About
All Feedback (561)
- n***o (34)- Feedback left by buyer.More than a year agoVerified purchaseAccurate description, fast shipping. Good seller. A++
- toyjdnut (11745)- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- pri-ind (35935)- Feedback left by buyer.Past 6 monthsVerified purchaseVery prompt and courteous buyer, great to deal with, Thanks from PRI Industries!
- t***s (236)- Feedback left by buyer.More than a year agoVerified purchaseTop ebayer
- linsterr (5390)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- nationwidesuppliers (792)- Feedback left by buyer.Past yearVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (12)
03 Nov, 2015
A little fragile and I recommend them with caveats.........
Bought 3 of these for myself and they are lightweight, comfortable and they work well. The problem is the temples are very fragile where the gray rubberized piece meets the hard black plastic piece. My most used pair broke fairly quickly and once I saw how small the connection point is I was surprised. These are safety glasses used in a work environment and should be a little more substantial than they are. On the bright side they were easy to repair by using a little heat shrink tubing, some fast setting epoxy and a spring metal stem about an inch long. I brushed on the glue, slide a piece of heat shrink tubing up the temple over the glue joint. I then took a small spring steel (toilet flapper repair hook that I cut a 1 inch straight piece from) slid that on the outside of the temple into the heat shrink, then shrunk it down with my heat gun. Very solid repair and once it's shrunk you can adjust the temple to the right angle. The break is too small and too clean for any alignment on its on. Now they are as solid as I would have hoped they'd be from the factory.
The lenses are very clear with average scratch resistance. Easy to clean for the most part though dirt around the nosepiece part of the lenses require a little digging to clean.
All in all they are very useful and I will guy more. I just wish they'd beef up the temple joints a little to withstand a work environment.
03 Apr, 2017
"So far" my favorite non OEM cable to date
In all the years of buying non OEM cables for longer reaches these are the best so far. I won't even add the caveat "best for the money" though they are the best and don't cost a lot of money.
I'm not sure if it's because the USB C plug is so robust already compared to a micro usb or if these are truly well made cables but I'm going with the latter until they prove me wrong.
Really good looking cables, allow for fast charging and have length to allow being on the phone while charging with plenty of slack. Also, the cable and connector is so lightweight, there's no real stress on the charging jack like other rubberized cables.
I'm a happy camper.
15 Feb, 2016
Gotta spend a ton more to get the same features as this little giant.
This is my second Rifftone power supply, first M-80. The size is about the same as a standard pedal and fits easily under a PT or other board with room for an average power supply. In fact it was too small to fit under my PT-JR and I had to turn the box 45 degrees ish for my temporary fix until I have time to seek a more permanent mount.
Power supply is quiet and pretty solid feeling unit. It's not too heavy, but it does have more weight to it than I expected. The only problem I had with mine was the input jack for the 18v wall wart was not centered in the enclosure opening and I had to open up the box only to find the circuit board screws were not tight. Once I tightened all 4 the circuit board was level and the input jack lined up just fine. While I was looking inside (I'm a DIY pedal builder so I'm naturally curious when it comes to circuits) I noticed a nice, neat circuit board with quality components with good solder joints. All the ports appear to be well regulated and has nice size filter caps.
That problem wasn't why I gave it four stars though. I gave it four stars because of the wall wart and one other minor issue. Now I know that since it worked and the PS didn't add any noise to my signal I should be happy. However, since the wall wart has a transformer built into it this one must be lightweight. I have another 18V power supply/wall wart of sorts that came with my Hotone Purple Wind amp and it looks like a miniature laptop power supply. I'd be willing to say that most would pay another 10 bucks for this great product if a better input power supply was in the box. I know I would because you still can't touch it's features and simplicity for anything near 100 bucks. The other minor issue is it would be nice to have shorter power leads as with most this PS has full sized leads and coming out of both sides it's very wide. One option would be nice if it had a mixture of extra cables with 90 degree plugs on each end. That would make this far smaller. In fact I'd be happy with 90 deg ends on ALL cables. They are easier on the jacks.
To end on a positive, this power supply for me has zero unusable ports. I know that many power supplies have ports that go unused but I can use each of these and once I get my last pedal on my board the 12v will be filled.
All I can say is overall, this is a well built unit and I am very happy so far. Time will tell if it lasts, but my full size Rifftone Isolated Power supply I bought a year or so ago is still going strong. Shipping is always fast from hazedandconfuxed/earthcitysound and I will continue to be a customer.