About
All Feedback (297)
- mxdude! (23007)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- floridabikesupply (631)- Feedback left by buyer.More than a year agoVerified purchaseDoes Great Business!
- allstateus (914081)- Feedback left by buyer.Past yearVerified purchaseThanks for buying a SquareTrade warranty. Call 877-WARRANTY if you need help!
- bestconnections (95797)- Feedback left by buyer.More than a year agoVerified purchaseThank you for your business!! A+ Transaction...Please shop from our store again!
- worleydfo (5322)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- honda288 (1725)- Feedback left by buyer.More than a year agoVerified purchaseA+ buyer
Reviews (6)
17 Jan, 2020
Great sound and performance at the cost of blood sweat and tears
I bought this exhaust mid 2018 and am writing this review January 2020.
Pro's
- Welds are great
- Sound is very good
- Can't beat the price
Con's
- Fitment is not perfect! Do not expect this to bolt on with no issues.
~ It touched one of the cross members and vibrated badly; solution was to
hammer a dent into the pipes.
~ The hangers do not put the mufflers in the right area.
- Supplied clamps and hardware were not sufficient; bolts broke, clamps failed,
or the clamps could not tighten down enough to keep the joints from moving.
- The expanded slip joints were WAY too big. It was VERY difficult to keep the
mufflers from losing position.
- The right side muffler section was in two pieces, this made it even more
difficult to maintain it's position.
- The rear mufflers are 2.5" inlet, dual 2.25 outlet. The size is fine, but the
internal routing is shaped like an "h". This makes it so the "straight through"
tip is the only one that gets soot on it. Ideally, I would have liked to see 2.5" in
and single 2.5" out. Then supply "Y" pipes and the four tips. This would allow
the installer to adjust the tips any way necessary.
- The exhaust tips are welded on. Clamped on tips would've helped in getting
everything lined up. It would have also been nice when...
- The exhaust tips are RUSTING. Because they are welded on, I will need to
remove the exhaust, cut the tips off, and HOPEFULLY there's enough piping
left to clamp on another set.
If I didn't have to dent the pipe and now have to cut the tips off and deal with the odd flow I would recommend this setup to someone willing to deal with the other issues. It does sound great with my headers though!
29 Jul, 2021
Poor tolerances
1 of 1 found this helpful Pocket that bearings sit in are way too loose. This brand needs to work on their tolerances, I haven't had any luck with their parts.
29 Jul, 2021
Just ok.
Once installed and screws tightened the system binds. There isn't enough clearance between parts. I sanded some material off and figured that was the end of the issues.
Servo saver function is too weak and gives too easily resulting in poor handling and inconsistent max steering angle.
Screws supplied are also soft and cannot be tightened enough without rounding out the hex.