About
All Feedback (494)
- outdoorgear61 (2494)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- cribgochoutdoor (77102)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- alum-droitwich (143901)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- *****- Feedback left by buyer.Past monthVerified purchaseThank you for choosing Rebirth Wellness as your preferred supplement brand!
- musicmagpie (13098795)- Feedback left by buyer.Past 6 monthsVerified purchasemusicMagpie*¨¨*:•.FIVE•:*¨¨*:•.STAR.•:*¨¨*:•.EBAYER.•:*¨¨*:•.musicMagpie
- simtekukmotorsportelectrical (433)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Reviews (2)
13 Sep, 2016
SEALEY VS820 with Pressure Release Valve
6 of 6 found this helpful After reading Spec's for several Brands of these Pressure-Bleeding units, I eventually settled on this Sealey VS820, it is a Brand Name that I trust for quality. I have followed the Instructions to the Letter and Bled both of my BMW's, a: 3 series E46 330i Sports Tourer & a: 3 Series E36 323i Coupe'. I did a complete brake fluid flush and Bleed, (Including the Clutch slave cylinder's) on both vehicles. It's the first time ever that I've done a complete fluid change, only bled brakes the old fashioned way previously.
I had NO Problems at all. The Pressure Release Valve on this VS820 makes it easy to finish off too! The tube inside (good quality firm tubing) goes straight down inside the right side of the vessel, so once you've finished bleeding, the Master Cylinder reservoir is brimmed, just tilt the whole VS820 unit onto it's left side so that the tube bottom is out of the fluid, open the last bleed nipple again until the fluid level in the Master Cylinder is correct or just below Max, lock off the Bleed nipple, press the pressure release valve and remove VS820 cap from the master cylinder. Hold the VS820 cap up in the air to drain any fluid in the tube back into the main tank, and wipe any drips with a rag, job done!! All of the fittings on the Sealey VS820 scream quality, and I can recommend it without reserve. Hope this helps someone out there who has any doubts about the item. - 5*****
14 Nov, 2024
It is Thick & Firm but maleable and seem...
It is Thick & Firm but maleable and seems to stay where you shape it ~ I feel sure that it will mould to the shape of my back as it warms ~ It fits perfectly well in the pouch of my RST Cow Hide Jacket ~ Thank You!