About
All Feedback (221)
- radioworld-online-uk (858773)- Feedback left by buyer.More than a year agoVerified purchaseThank You for your order 5 Gold Stars! ★★★★★
- survivalaidsltd (6746)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- expressscooterparts (14293)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, highly recommended, 5 Star! 🛴🛴
- max.medsurge (227475)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- livewell-today (43077)- Feedback left by buyer.More than a year agoVerified purchaseWe really appreciate your order, thank you for ordering with Livewell
- ayka-trading (19084)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Reviews (9)
09 May, 2017
Good quality mudguards
All bicycle mudguards are a bit fiddly to fit particularly full sized with metal stays, I fitted these to a bike with 700 x 35 tyres and still needed to trim the stays down by about 30mm all round to get them to sit correctly and evenly spaced around the wheel so they looked good, the tiny screws which stop the stays from moving once attached to the mudguards were particularly fiddly but the end result looks good, so far they have stayed exactly where they were put, and I don't foresee any problems with the stainless fittings and nuts/bolts/washers.
Most of the good mudguards that I have fitted come with "breakaways" in the event of an accident or if they take a heavy knock, these have them and would be easy enough to clip back in place, the mudguards themselves seem quite tough. I would buy and fit them again for a customer I bought these predominantly because they were white, but I would recommend them regardless of the colour you choose. The only thing I thought they needed was a front mudguard nose finishing piece, it is just a plastic edge, no soft rubber edged finisher which would have been nicer.
10 Oct, 2017
Good adaptor, works well with Shimano just watch out for chain clearance
Works exactly as advertised, only problem I have encountered with these at times is some gearing brings the high gear (small cog) very close to the drop out, and when the chain is fitted it can rub against the D shaped nut, you can remedy this by slightly recessing the frame dropout with a dremel grinder and flatting the head of the D nut and bolt so it is flat and smooth, which will give it the required chain clearance, paint the bare metal and job done
10 Oct, 2017
Excellent YBN chain
Fitted a number of these YBN 747's to BMX's, 3 Speed Sturmey Archer geared bikes and to fixies. It is very strong chain ideally suited to BMX and fixie use which puts alot of strain onto this component, but it is also visually a nice chain with its smooth straight outside edge, which makes it easy to keep clean by running a cloth over it to remove grime, rust resistance is good and the chain comes with a matching connector link and clip which makes it a piece of cake to remove, clean and relube, dont let the BMX kids bike stuff put you off, its exceptionally well engineered, I won't use anything else in these particular applications, they are that good.