About
All Feedback (425)
- diggn4deals (1160)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- gagoom (6164)- Feedback left by buyer.More than a year agoVerified purchaseThank you!
- kastarusa1 (256070)- Feedback left by buyer.More than a year agoVerified purchaseThank you very much for your order!
- discover-books (1706288)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- thrift.books (3941594)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!! ~Thrift.Books
- atxglobaltrading (6379)- Feedback left by buyer.More than a year agoVerified purchasegreat customer. prompt payment. Thank you for your business.
Reviews (4)
25 Sep, 2017
Nice minimalist modern style - nice quality
Minimalist modern. Would look great with any paint or wood color. They look great with both my light oak and ebony cabinetry.
The finish is nice and smooth. Sometimes satin finishes can be rough, but this has a nice, slippery smooth finish. You can still see a very slight vertical brush. They have a very nice, high quality, solid feel. I just installed them but I think they will hold up for a long time.
Dimensions: The front surface is 5/8 in wide by 1 1/2 in long. The top dimension (from the cabinet surface to the front surface) is 15/16 in. The front surface that you grab to pull the drawer open is 3/16 in thick which gives 3/4 in. space for your fingers between the cabinet and the pull - plenty of space.
I'm using mine on bi-fold closet doors which are thicker than cabinet drawers/drawers, so the included 1 inch screws were too short. My local hardware store had the length I needed. They take the standard #8-32 cabinet screws. The screws turn into the pulls 3 1/3 revolutions (about 3/16th inch).
I was concerned about possible rotation of the pulls since they only use one screw, but there is a little convex dimple on the cabinet side which will help keep it from rotating when snugly tightened. Another pro of these pulls is you only have to drill one hole - quicker install.
31 Dec, 2017
Good bulb socket extension
Advantages - Extends a light socket about 3 1/2 inches. You can leave the extension straight or bend it up to a 90 degree right angle, left or right of straight.
Disadvantage - If you need to bend the extension, the direction that the extension bends may not be in the direction that you need it. The bend is accomplished with a joint, not with a "goose neck" which bends in any direction. After the extension is screwed into the socket the extension will only bend in two directions. I happened to work for me but it may not bend in the direction you need.
Measurements: The bend joint is about 1 3/8 inches from the end of the original socket. When bent at 90 degrees, the edge of the new socket is about 2 1/2 inches from the shaft joint. When left straight, the overall extension from the edge of the original socket to the edge of the extended socket is about 3 1/2 inches.
25 Sep, 2017
Great handy clip. Use it for everything and find new uses almost daily.
Purchased some of these locally and after trying them I wanted more but couldn't find them anywhere. Was so happy to find them online so that I could stocked up with more as I keep finding more uses.
Dimensions of each clip: Length=1 1/4 in. Width at widest part (handle end) = 1 1/4in. Diameter of circle part= just shy of an inch. Depth of the clip= 1/2 in.
These are small but I even use them for large bags like chips because they take little space in the drawer unlike the old bulky clips. I find they are my quick go-to fastener for anything in an open bag around the shop, house or for crafts. Great for keeping all parts together in a bag that I'll need for an up coming project. It is all i use now for open bags of muffins, bread, cereal, chocolate chips, etc, taking parts to the hardware store to find repair parts. Today I clipped two of them on the bottom of an index card and set it on the table to hold the instructions up while I worked.