About
All Feedback (2,452)
- marco_paul_outlet (261383)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- kab-healthcare (10890)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- infinitevapour (22258)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, and a valued customer
- *****- Feedback left by buyer.Past monthVerified purchaseGood buyer
- not-just-drives (39634)- Feedback left by buyer.Past monthVerified purchaseThank you for the purchase -
Reviews (8)
08 Jul, 2020
Not really for a van or minibus.
I bought it to jack up a VW T4 Transporter. Honestly, it's only good for a small car or for positioning an engine / gearbox but for a van, with the natural suspension drop, is almost at full lift extension before the tyre leaves the ground. I had to supplement with a short length of 4x2 (100x50mm). It is quite hard work pumping the last 2 inches, had to stand on the lever, leaving me doubting the 2 ton claim and wary of a burst seal. It works but only just. Carry wooden blocks and load spreading planks and definitely a block or an axle stand. Useless on soft ground I imagine. I was taking the wheels off one by one and stripping / painting. In july the axle stand was digging well into the roadside tarmac overnight. PS. Van not fully loaded. With hindsight I should have spent more but I thought it would be better than the issue screwjack.
01 Jun, 2017
Bench Drill - excellent for the home workshop
I only need small diameter drill bits - 1.5-2.1mm and a regular expensive bench drill would be over the top and unwieldy. Using a hand drill I used to break many drill bits and a large number of operations becomes tiring.
I used my first one so much I decided to get another one as both back up and to have two places to use them. Two machines which are light and easy to move about. I have mine mounted on a tray to control the swarf.
I use eye protection when I use a rotary wire brush would be sound advice in any situation.
Good machine for the price.
01 Feb, 2017
Ring stretcher
It did what it was supposed to first time used. It is inexpensive so I won't mind (and will probably smooth off) the sharp rough cast edges for a soft handed person to use comfortably. As is I recommend gloves. I felt it necessary to make a wooden base and holder to avoid the need for three hands.