About
All Feedback (146)
- spares-2-go (1564108)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- 8scissorjack8 (35618)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- pcoemos2020 (6642)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- accessories4fones (278580)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- shopcase_uk (4883)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- tywatton (1519)- Feedback left by buyer.Past yearVerified purchaseAn easy transaction thank you ⭐️⭐️⭐️⭐️⭐️
Reviews (4)

02 Apr, 2017
Great tool for the price.
1 of 1 found this helpful Used it to remove wiper arm from an '04 car, which was probably the first time it had been removed. It did take a little forcing to get it undone and the 2 legs underneath the wiper arm with the bit sitting square on the spindle. Used plenty of WD40, didn't have a better alternative to hand, and it eventually came loose after repositioning the tool a few times.
A more expensive 3 legged version would of given more leverage but in a tight space could be difficult to put in place. Fairly happy with the tool and would use again for anything that isn't rusted in tight.

11 Sep, 2019
Good quality paint, correct match.
Much better than the touch up paint from a large chain.This spray paint blends in very well with my existing paint, after a basic sand, clean and a few coats of cheap primer. I have yet to apply the clear coat, but it looks better than another part of the car with the wrong paint. Good paint has covered what I lack in detailing skills. If you needed to do a professional job it is certainly possible given the time and some more materials.

18 Mar, 2020
Better than a cutout.
Fits snugly into place, push two ears in one side and then with a slight bend the other two just drop in. No frayed edges or broken bits that you might get from using a cutout one.