About
All Feedback (182)
gogreenbike (63122)- Feedback left by buyer.
Past 6 months
Verified purchase
Great communication. A pleasure to do business with.
am-autoparts (3380341)- Feedback left by buyer.
Past 6 months
Verified purchase
5 STARS!! Quick response and fast payment. Perfect! THANKS!!
uptogethertek (126105)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
painless_trading- Feedback left by buyer.
More than a year ago
Verified purchase
A++++++ Thank you!
atvpartsmall (1948)- Feedback left by buyer.
More than a year ago
Verified purchase
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
mr-retro (316314)- Feedback left by buyer.
More than a year ago
Verified purchase
You're a champ! Keep up the good work. thanks from liquidrc.com
Reviews (3)
17 Mar, 2017
Simple install, Good product, Complete kit
This kit simply lowers the mounting point of the transfer case support a little over an inch straightening both output shafts relative to the diffs.
A stud must be removed on both sides for installation of the new bolts (provided). Removal of the studs can be a problem. Double nutting did not work for me so I just welded the old nut to the end of the stud and used the impact to pull them out. Easy-Peasy!
If you are still running a factory exhaust, this will affect the hanger that is attached to the transfer case support (the thing you are lowering). It can place the exhaust hanger in a bind and put pressure on the exhaust manifold.
I cut the factory exhaust hanger and then when finished with the work, lined up the cut ends where they need to go now and welded them back together.
Installation of this kit is not difficult. Takes about two hours if you have the tools and a good head.
Bonus - they included thread lock in the kit so your 4 new bolts don't back out.
26 Jan, 2021
Good solution to stop one-wheel-drive
For some time I've run a geared limited slip for traction control but tired of having to pump the brakes to engage the idle wheel, I switched to the Aussie Locker.
I installed this unit one day and went wheeling the next. Install is pretty simple. You need a set of feeler gauges and basic hand tools. Order new thrust washers when you order the Aussie. Yours might be okay but you won't know until after install. They are inexpensive so just buy them.
In use, the Aussie did not disappoint. Both rear wheels remainder engaged helping me through all sorts of terrain.
Expect audible clicking when turning under power and when locked in 4x4.
I installed this in a 97, 4 cyl., 2-door Wrangler so, short wheelbase and light front end. On the highway, if you mash the gas while in a turn, the Aussie will engage and push the front wheels. It's something to be cautious about.
In summary; happy, pleased, satisfied.
22 Apr, 2020
Good packaging. Great product.
Needed (wanted) a larger capacity battery for my rock crawler. This fit the bill. It was well packaged and has performed well.