About
I'm a CNC machinist by trade and live and work in the west mids, uk.
I am mostly a buyer on ebay but do some times sell.
I am mostly a buyer on ebay but do some times sell.
All Feedback (720)
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat ebayer, a pleasure to do business with, thank you. A++++++
- digitgames (3070)- Feedback left by buyer.More than a year agoVerified purchasePrompt payment, valued customer. Hope to deal with again in the future!
- umtmedia (187409)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- switch_elec (769156)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat Ebayer. Thanks from all at GivealittleBack
- ideasuniverse (1998)- Feedback left by buyer.More than a year agoVerified purchaseThank you for ordering from us.
Reviews (60)
17 Jan, 2018
Exellant Tool
1 of 1 found this helpful When i first got this, the first thing i did was to sharpen the blade and it didn't take much work either, 10 minutes on an oil stone, then a few more on a 1000 grit sanding disk is all.
I spent a little bit of time tuning the throat with a small file and that's all i did to it.
Its so easy to adjust the depth of cut by just tapping the back of blade withe a small mallet and after a little bit of practice i now get very fine shavings just as i wanted.
I'm usually rubbish with planes so this says a lot.
15 Jun, 2017
Nice Enclosure For Arduino.
The product comes as a kit of parts which you have to assemble your self, the plastic parts are covered with a protective paper which you will have to peel away,
Tools required for assembly, long nosed pliers and precision screwdriver.
Its fiddly to put together if like me you are not nimble fingered, none the less it is easy enough
to do even for me, if you don't like tiny screws and tiny nuts then avoid it, otherwise its great.
28 Aug, 2017
Long reach for narrow drill bit.
I got these mainly for drilling pilot holes for wood screws and nails and i haven't used them on metal yet so can't really comment.
They work well on wood though and give a nice clean hole with no jamming of the bit.
Very good for pilot holes for short or long screws and nails.