R33 RB25 DET OEM intake manifold/plenum with throttle body and fuel rail
£200.00
About
All Feedback (40)
- k***m (712)- Feedback left by buyer.More than a year agoVerified purchaseExcellent seller, went the extra mile to organise postage and kept in constant contact with updates.
- autopartzone86 (3615)- Feedback left by buyer.Past monthVerified purchaseGreat communication. A pleasure to do business with.
- s***m (58)- Feedback left by buyer.More than a year agoVerified purchaseSeller 100% recomendable.
- *****- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- new-autosupply (9235)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer!!!
Reviews (4)
15 Jan, 2020
Solid build quality with very precise and quick readings!
Although the sensor itself is made by Bosch, Innovate have chosen it to accompany their overall kit as it is a very precise and quick sensing unit. The quality of parts was obvious upon opening up the box. The install was straight forward, however I feel that a bit more examples for the wiring instructions could have been included, especially for people with minimal to no electrical knowledge. Otherwise I am using it as a standalone unit to simply measure my AFRs with the gauge, and it works perfectly.
09 Jul, 2017
Good bang for the buck, but not great.
1 of 1 found this helpful On first glance it looks like a solid set, however upon using it a few times I encountered a few problems.
Firstly the 17mm long socket snapped at the top during normal torquing procedures. It could have been made slightly stronger.
Then I saw that the long 10mm socket was different than the rest, and does not look like the one from the picture. It was not polished and finished the same way. May have been chucked in last minute.
Lastly, the quick-release button does not always work, sometimes the sockets get stuck on quite hard. Other times they do not snap up nicely and just keep falling out. A better internal spring could be used with some more lubrication would be my bet.
Overall it's an okay set for the occasional DIY oddjob, but not sturdy enough for prolonged use.
24 Jul, 2017
Does not fit without modification.
Firstly not all three holes line up with those on the valve cover. You either have to use just two of them to bolt in, or drill them bigger.
Secondly, the front of the cover was too inward, which caused the timing gear and belt to rub against it, scratching it severely and covering the timing belt with lots of debris.
The edges of the cover were also very sharp so handling it was not comfortable.
In summary, this is not an easy replacement part. You have to make some modifications for it to fit without problems.