MBK KILIBRE / Yamaha Versity 300 Passenger Backrest
£26.40
About
All Feedback (1,101)
- 0***e (117)- Feedback left by buyer.Past yearVerified purchaseVery fast delivery, thanks very much they are as described
- v***0 (1349)- Feedback left by buyer.Past yearVerified purchaseAs advertised and super fast delivery
- i***l (5296)- Feedback left by buyer.More than a year agoVerified purchaseAs described, well packaged and quickly delivered. Prompt comms, helpful seller - many thanks.
- i***m (1994)- Feedback left by buyer.More than a year agoVerified purchaseSuperb item, great price and condition exactly as described - immaculate. Great comms, secure overnight delivery with more bubble-wrap that you can shake a bubble at. Perfect seller.
- t***e (587)- Feedback left by buyer.More than a year agoVerified purchaseLovely ring! Arrived quickly and good communication with the seller. Would highly recommend this seller.
- l***a (1512)- Feedback left by buyer.More than a year agoVerified purchasePerfect buying experience. Good price, and prompt despatch. Kept me informed and really cheerful contact. Highly recommend. Thanks again.
Reviews (8)
21 Jul, 2021
Japanese quality choke cable
Why buy genuine? This cable is of equal quality to the original. Only it's a fraction of the cost and includes post. Great stuff!
17 Mar, 2019
Fast ebike kit? Yes. Requires technical skills!
12 of 12 found this helpful Firstly, make sure that your bike has hydraulic disc brakes or you won't stop this.
Secondly, you will need to fit a spacer or washer to the cassette ( 7 speed gear cogs ) as it touches the hub and won't free wheel. You will need a crank puller tool to fit the PEDAL ASSIST magnet ring and sensor (PAS). Depending on the bike, you may have to modify the ring to fit. Make sure the direction arrows rotate forward on what ever side suits, if not you will have pedal assist on back pedalling!
Fitting the wheel: - Make sure you space out the cog side and disc side with washers provided. You may find that depending on the bike you have, you may require additional washers to space both disc and cog sides which needs a bit of force to widen the rear of your bike frame to get the wheel in!
Depending on which type of hydraulic brakes you have, you may have to space the disc from the hub as the tolerance of hub to rear caliper may be too close. The plastic spacer is tempting but it should be something hard so you can have equal torque on the disc bolts to avoid uneven disc rotation.
Brakes - ok, so now you realise that you should have hydraulic for safety although cable disc is just about taking away some of the speed..... You have changed the brakes to hydraulic - IT STOPS! HOWEVER the half second of mad power can cause you to shoot away on PAS ON ANY SETTING unless you incorporate the brake switches from the cable operated levers from the kit! The brake switches KILL the motor instantly and for safety should be incorporated.
Remove the lever pivot pins from the levers supplied and very carefully cut a line through the lever clamp body.. you will need to do this twice allowing enough room to remove the full switch assembly intact through both cuts - the cuts will be done with the lever assembly in the vice for accuracy as once the lever is removed from its clamp, you can cut using a one millimetre cutting disc very carefully as not to cut the cable of the switch. Once cut, remove switch. You can then cable tie or glue into position. Use a multimeter set on continuity ( beeps when you contact the probes together) to check the switch operation when the lever is pulled. By this time, you should have worked out how to attach your brake switches. NOTE - apply a little lube to ALL connections incase you need to separate them as a lot of wiggling and pulling is required to separate.
Hopefully, now you have routed ALL cables, paying attention to areas where rubbing may happen, especially the cable from the rear wheel hub. Cable ties are best, but there are stick on cable tidies with c clips for the tidiest results.
Now that you have everything connected, - whether you have incorporated a key ignition or hidden power switch, it's time to switch on - remember to fit an in-line MAIN FUSE from the battery before any switch or connections for safety!
THE LCD.
The display has all of the programmable functions - 1 - 16.
I won't go into detail as the owners manual shows the options. YouTube has info on this but best to try for yourself where it applies. You will know at this point
After all that, you have a silly, powerful bicycle that is effortless and potentially dangerous - exactly why you bought this kit !!!!!
Enjoy and modify till your happy! Regards Mark
11 Nov, 2024
Effective in improving mpg. I'm happy wi...
Effective in improving mpg. I'm happy with this product.