About
All Feedback (91)
- *****- Feedback left by buyer.Past yearVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- parts-and-bargains (60791)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- direct_wholesale_savings (1838)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- unitedtires (282975)- Feedback left by buyer.More than a year agoVerified purchaseGreat Buyer, fast payment, please come back anytime!
- *****- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (3)
14 Jan, 2020
Mouse operations
The good lots of buttons that are programmable.
The scripting is nice.
Some of the buttons do not work correctly, I programmed one to tx a 5 and on startup it sends an endless chain of 5's, Makes it really hard to log in to your computer. After you continuously push the button 10 - 20 times it will stop the repeats but I ended up just turning off the button.
It's really hard to push some of the button - but that may just be an unavoidable problem with the mouse design.
It's not really comfortable to me hard to hold.
19 Sep, 2016
Strong stuff
The Petg stuff is tuff by far the strongest I've used which have only been pla and abs.
The only problem I had was unwinding it. The winding was to one side of the roll making it bind as it
unrolled this was prob. just an error on this roll.
Petg can be a pain to get set up right it's kinda gobby and stringy, start with PLA settings turn on oze and wipe controls and up the retract distance.
30 May, 2017
Lots of fret buzz
I'm a beginner with guitars so I might get a few things wrong. But I expected it to be setup out of the box.
Turns out the neck had no relief so it had lots of buzz. I guess moisture could be the cause, it is hot and damp here in florida. The guitar only has a one way truss rod in it. So you have to loosen the rod and wait a day or two for the neck to bend.
Also the guitar is a little on the quiet side I'll have to go thru the electrics and see if everything is tight.
It's has a good feel but, not a great feel the action feels off might try and lower it after the neck gets set in place. I also put new strings on it - helped a little.
Mike