144 PCS WATCH REPAIR TOOL KIT WATCHMAKER BACK CASE REMOVER OPENER SPRING PIN BAR
12 Dec, 2024
I have used this to unscrew the back fro...
I have used this to unscrew the back from one of my watches. Setting up the pins to the correct diameter was a bit fiddly but, once done, it worked very well. I've also used the "knife blade" to prise of the back from another of my watches. I think I must already have broken even with these 2 battery replacements.
HIGH SPEED 4 PORT USB HUB 2.0 MULTI SPLITTER EXPANSION DESKTOP PC LAPTOP ADAPTER
01 Apr, 2020
Neat, no-nonsense product.
Very neat product with a reasonable length of cable. I've only managed to upset it (and my laptop for some reason) when I plugged too heavy a load into it. Both recovered after unplugging the offending device.
The sensor is easy to wire up and has outlets for 2 cables, although I used a single 4 core. For reasons of sealing, there is not much scope for adjusting the mounting screw positions so, if you are a perfectionist, you will have to be accurate with drilling the mounting surface. I was drilling into very hard bricks which made this difficult, resulting in a box that was not quite vertical. The lid, when unscrewed, is held to the box by a thin nylon cord. This could be useful if you are up a ladder to stop the lid being dropped but I found the cord broke very easily. This is only a very minor point though. The time control is a switch with discrete time settings. The plus side of this is you know exactly what time you have selected, the downside would be you can't select anything in between. The light setting is an analogue control. I have not actually used the "current light level" set feature (switch on side) so I can't really comment on that.
Overall this seems to be a well built and robust product