About
All Feedback (1,915)
- safelincs (98083)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment, great eBayer A+++
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- albatrosing (7330)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- numberonebatteries (165832)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- tight-fit-seats (7338)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- rennie_tool (99713)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (9)
13 Feb, 2019
Most of the kit is fine but in my case the circlip was very poor, appeared to be made of Plasticine?
The circlip that keeps the piston in the bore is NOT good quality. The one I had remained in the compressed position to fit it into the bore, it would not spring back to its correct size. I can only assume the circlip has not been tempered correctly?
24 Apr, 2019
Good kit!
I've used this adhesive for years (too many to mention), I've stuck (no pun) with it as it's always done what I need so I've never compared it to other types.
Easy to apply, I use a small screwdriver dipped in the bottle then applied to joints whilst I hold the two parts to be glued together, capillary action 'sucks' the fluid along the joint, after ten seconds or so the pressure can be released and the joint is good. Set properly after a few minutes.
I use it on Esci, Italeri, Revell 1/9th scale (200mm) models.
11 Dec, 2019
Good value.
Miniature, not on a 0.1" pitch, fairly high switch pressure required to operate - not a bad thing though. Surface mount with four 'legs'