About
"Purnam Sales" does not sell everything, nor everything that you might need, but we hope your purchases will contribute to a fulfilled life of hope and vision! This is the meaning of Purnam . Be well..
All Feedback (11)
- marlocirculartrading (272)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat buyer. Thank you for your business.
- easycaresolutions (158384)- Feedback left by buyer.Past yearVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- bargainoutlet01 (19658)- Feedback left by buyer.Past yearVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- yeso-direct (62840)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
Reviews (3)
07 Jun, 2018
Straightforward, good value....
Made in Malaysia, shipped from Gibralter. No problem....
21 Jan, 2021
Excellent basic camera, foot clamp a bit limited.
Excellent little camera! The spring-loaded clamping extension mechanism on the foot could do with a slightly wider angle of opening and holding...to stop it from popping off the top of flat LED monitors which are a bit thicker than the average laptop (even legacy laptops). My 600mm widescreen AOC LED display is too fat for it by 5-10mm.
31 May, 2018
Solid build, quick and easy to assemble...
Pre-assembled sub-assemblies and standardised nut sizes, and screw-on 'F' type cable connection all contribute to stress-free installation. Unfortunately points are lost from the square 'cut-off' at the barcaket end of the lower reflector sub-assembly. This snap-lcks into the oblique bracket at the base of the main-spine sub-assembly of the aerial/ The square cut has to be recut at an angle by hand with a hacksaw to provide the insertion depth needed for it's locator lugs. in the reflector sub-assembly, to click into their location holes in the lower bracket. Be careful to cut the correct direction of angle or you will reverse the reflector... it has a front and a back side to it. I connected directly into a spare satallite dish cable connector already installed.. and used the unused dish's boom to attach to with a few M6 U-bolts and pre-drilled 4" flat brackets, plus some chocks as spacers to make it all tight.