About
All Feedback (871)
- neweralocks (53097)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- newgenerationclocks (38086)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- woodpcb (11144)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- gbmobile-limitedes (20777)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
- sonicinks (18275)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
Reviews (22)
20 Feb, 2019
Not exactly easy but it works.
We loaned our Picasso and it came back with the key fob quite badly damaged and then the button covers fell out. I bought one from another supplier but it was for a different key so I couldn't use it but this one did the trick.
Two things to be aware of. This one is for the key insert with a plastic push in end whereas the other takes a key with a screw mount. The key is identified by having a locating piece on the left as seen from the front. This can be seen on the product pictures. The original key can be removed by flexing it quite forcibly up and down with the fob horizontal and pulling at the same time. This takes some effort but it can then be reinserted into the new one and pushed home by pressing downwards onto something hard (concrete slab) with the key pointing downwards and it will click home. It is not secure until it clicks into place.
The other is to remember to recover the small security chip and replacing it into the new fob. Mine did not have anything to hold it in place so a spot of superglue might be a good idea.
Other than that, now good as new albeit without the Citroen chevrons.
18 Oct, 2017
Everything in one pack.
1 of 1 found this helpful I bought this for my son who had been using small rolls of sellotape in disposable dispensers. This pack was perfect with a small compact dispenser heavy enough to be stable on a desk without taking too much space along with adapters to take full size rolls and small ones and more tape than will be needed for a very long time. I could not have designed anything better for the purpose and all at a very reasonable price.
14 May, 2020
My ancient S/H Thorens now works perfectly.
This belt fits the original specifications and is readily available at a good price with excellent support from this supplier. Beware - there are 2 different belts, one for the original 150 and another for the MK 2.so it is important to specify and/or enquire. There are belt drive issues with this model which many may already be aware of but mine, a gift in a delapitated state, had one which I had not realised. The replacement belt did not work at first because the drive pulley had slipped out of position and was too low. It seems to be a push fit and needs to be set in position with the bulge in the centre of the section for the required speed in the centre of the speed change forks. If out of position the belt can rub on the forks and cause problems. Mine was actually 12 mm too low causing the original old belt to run out of position giving a perfectly stable speed of 37rpm. Thanks to the new belt and support from the supplier it now works perfectly. A great deal all round.