About
All Feedback (448)
- d***e (2898)- Feedback left by buyer.Past 6 monthsVerified purchaseitems well packaged - very helpful and answered all questions - A++++
- s***j (6868)- Feedback left by buyer.Past 6 monthsVerified purchaseItem received as described. Many thanks
- blukoo-uk (259035)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- a***l (296)- Feedback left by buyer.More than a year agoVerified purchaseAn easy transaction. Good comms, and the item arrived as described and on time.
- 8***y (4261)- Feedback left by buyer.More than a year agoVerified purchaseAccurately described, clear communications A+++++++
- autocarrepair666 (15862)- Feedback left by buyer.Past monthVerified purchaseDear valued customer, thanks for you purchasing from us. Great buyer.
Reviews (8)

30 Jan, 2019
Second time buy
How they sell it at such an aggressive price I don;t know but as far as I can tell this RAID card is genuine Adeptec hardware.

19 Feb, 2020
Very handy little devices
Very handy little devices. Been getting fed up with fan noise recently so I tried this little anti-vibration fixings. They work well. Just need to cut/drill the hole, remove the burrs and fit one of these fan holders. They don't just work for fans either. I used some to anti-vibration mount several 3.5" hard drives, that worked too. Obviously, the AV mounts have to fix to a bracket which then attaches to the hard drive. As I said, very handy.

19 Feb, 2020
I liked it, I bought two.
Out of the many LCD driver boards now available on the internet, this one offers a good balance between functionality and cost. Actually, if anything, it could be a bit cheaper. As the ad. describes the board has all the main connections (HDMI, DVI, VGA) but what is not said is the range of LCD screens this board will drive. As far as can tell, this monitor kit will driver just about any LED LCD screen and I have tried many from 15 to 17.3" screens. They all worked fine as long as they had the right 40-pin connector.
The down sides are the board needs a 12V PSU. I would like to see an adapter that takes the 19.5V (to 20.5V) from a laptop charger and power both the board and laptop with that. Its a problem because of so many different connector types used for laptops, I know. Another hick-up is the unit fires up with Chinese language as default, so you need to mess about a bit to get the language set right, while not knowing Chinese. tsk! tsk!