About
All Feedback (2,788)
- daral7076 (156)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- tamatthew8 (4067)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- dayeye-16 (5933)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- redbeckshooting (1844)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- another-world-games (12576)- Feedback left by buyer.Past monthVerified purchaseThank you, great transaction! Welcome here ALWAYS from anotherworldgames
- musicmagpie (12927930)- Feedback left by buyer.Past monthVerified purchasemusicMagpie*¨¨*:•.FIVE•:*¨¨*:•.STAR.•:*¨¨*:•.EBAYER.•:*¨¨*:•.musicMagpie
Reviews (117)
30 Aug, 2018
A great way to improve your percussion revolver.
These are excellent quality nipples, and are well worth fitting into your black powder revolvers. They are harder than the original ones and don't burr after long use as do the old steel variety. I found then very consistent with reliable ignition of the charges. I would suggest trying all the various caps that you can find and try them all for fit. They may all be number tens or elevens but they do vary in size. My Remington 1858 n.m.a. uses Remington number 10caps, these fit like a glove and stay firmly in place during the firing of the entire cylinder. The only problem so far encountered was the r.o. thinking the pistol was capped, the nipples are a nice brass colour before firing darkens them. I even managed a couple of gongs on my first outing with them, a fluke I know but nice just the same.
28 Apr, 2023
An absolutely brilliant film, suitable for the whole family.
A brilliant film, suitable for the whole family, especially if you have a couple of daughters. A great way to pass a couple of hours on a wet miserable day, or pass a quiet evening indoors.
13 Nov, 2019
A nice looking solid bookcase.
The instructions were passable, and once I found a big enough space to assemble the unit, it all went together without problems. The only issue that I had was aligning the rear panels. The outer ones were simple, I fitted them into the top corners and then fixed down each side. The centre panel didn't quite want to line up with the two sides. In the end I fixed it roughly level with the outer panels but had to mark the position of the shelves from the inside and drill pilot holes through from the front so that the screws from the rear panels actually went into the rear of the shelves. Once fully assembled it becomes quit rigid. I put spacers under the front of the unit to tilt it slightly backwards and once fixed to the wall at the top all was done. It is now a solid fixture holding five trays of my books, and it looks nice as well.