New USB Cable With ON/OFF Switch Toggle Power Control For Arduino Raspberry
15 May, 2017
If you require data this is not for you, try a switched hub instead.
This lead will work fine to switch power on and off to a USB device however there are no data wires inside so you wont be able to communicate down the lead.
What does this mean? If you plug a USB device which may want to communicate to the host (device supplying the power) it wont be able to.
Example a smartphone, memory stick, or portable hard drive wouldn't be able to communicate down this lead.
For this reason unless you just want to plug a USB light in to it then its probably not for you.
Try a USB hub with on off switches they aren't that much more expensive.
Handbrake Shoes fits TOYOTA RAV-4 2.0 2.0D Hand Brake Parking ADL 4654042020 New
29 Sep, 2021
1 out of 4 didn't fit!!!
One of the 4 brake shoes wouldn't fit no matter what I did I couldn't get it to fit and after an hour of trying to get it to fit I gave up and an old one back on and it fit perfectly! I would recommend trying another make.
1Pc BT06 Bluetooth Serial Port Wireless Data Module Compatible With HC-06 New
13 Jul, 2017
Not 100% compatible with the HC-06
This is a cheaper alternative to the HC-06 and as you'll find its nearly always listed as a "compatible" board with the HC-06, However its not 100% compatible after running test the board would reply back additional bits of data when the first packet of data was sent/received, So you need to keep this in mind when using it as a direct replacement for a HC-06 on an existing project.
Additionally the signal strength was much worse when compared against the HC-06, possibly %50 or more at a certain point the board would just be come unstable.
All in all I would recommend the HC-06 over this board for the little more cost you'll get a more more reliable board.