About
All Feedback (87)
- bigg.red (1235)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- countryfishgirl (22591)- Feedback left by buyer.More than a year agoVerified purchaseGreat Customer, Fast to Pay, Thank-You countryfishgirl*****
- greixferreir_0 (9139)- Feedback left by buyer.More than a year agoVerified purchaseThank you for your purchase.
- gate_openers_unlimited (33404)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (3)
08 Jan, 2019
Firmer option than original
These make your headset like new again. They are slightly firmer than the original set, which can be seen as an improvement for stability.
08 Jan, 2019
5 hours of battery life instead of 10 hours
The battery life in my G930 with this new battery is only about 5 hours. The original battery lasted 10 hours. I still can't use the headset when the battery dies while plugged in - the battery is too weak to stay on for more than a few seconds. It has to be turned off and charging for some time to be usable again. That could be a problem with the G930, so maybe it would be best to buy a new headset instead of trying to fix it with replacement parts.
13 Sep, 2018
Auto-level sensor mounted too low
1 of 1 found this helpful I really wanted to like this printer, and use it to print all kinds of puzzle pieces and interesting shapes. The heated removable bed, touch screen, metal frame, and auto-leveling seemed like great features for the price. Even the 120mm cubed build volume seemed useful enough for my purposes.
However, it breaks down to one major problem: The auto-level sensor is mounted the same exact height as the print nozzle. This sensor is almost guaranteed to rub up against your prints and do damage to itself and the prints. Mine continually got bent out of shape and would not auto-level correctly. This is definitely a part to watch out for failing, and something necessary for modding - though this will void your warranty.
I found that a Z-offset of -0.85 was the perfect height for the initial layer to stick - this is a manual setting which I learned about later. Auto-leveling seems to only calibrate the 4 corners, but the z offset setting is up to the user to set correctly, by touching the "far" and "close" buttons. The default settings in Cura for the mini v2 worked fine after setting the Z-offset on the printer. The instruction manual clearly states to use the mini v2 preset. I managed to get a total of 5 successful small prints.
The printer died after a few weeks of use. The X, Y, and Z axis movement no longer works in both directions, and there's no noise as if the controller is not even trying to spin the motors. I'm not sure what's wrong with it, I've tried power cycling it, to no avail. I will try to update this review in the future, if the seller manages to refund/replace it.