About
All Feedback (189)
- scott.nieman (11997)- Feedback left by buyer.More than a year agoVerified purchaseExcellent transaction...a pleasure doing business with this eBay member.
- tecdale_inc (1002)- Feedback left by buyer.Past yearVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- autopartz-ca (4595)- Feedback left by buyer.Past yearVerified purchaseGreat communication. A pleasure to do business with.
- montrealonlinestore (1144)- Feedback left by buyer.More than a year agoVerified purchaseThank you for supporting us! Hope to deal with you again in the future :) !
- ecoflowdirectca (459)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- eachstop (821)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (6)
29 Aug, 2017
An oldie but Goody with no doubt
5 of 5 found this helpful The HP 3400A has 10 Mhz bandwidth and True-RMS readings via a thermocoupling bridge which measure the heating component of the voltage. This makes it superior to conventional analog and digital voltmeters where regular analog meters top out at 3 or 4 Mhz and where DVM's often top out at 100Khz. The HP 3400A also offers a crest factor of 10:1 so that pulse trains in the signal will not throw off the main voltage signal that the meter is attempting to read.
One caution that should be observed is that the thermocoupling circuitry can be damaged by excessive overloads more easily than conventional meters so always start the meter at a higher voltage setting and then scale down to the range to be measured. Doing that will ensure that you don't overload or damage the meter..
21 Mar, 2018
Gets the job done
Quality piece of kit, to be sure, but a bit dismayed at how expensive a simple adaptor like this costs to purchase by the time you pay for shipping.
22 Dec, 2017
Great Value
I was going to go all out and get a Weller analog soldering station at about 6 times the price of this one. But then I thought maybe I should give this one a try first as it covers the same basic features.
So far, I've found this to be a decent unit that heats up quickly and the handle seems to stay reasonably cool even after being on for 30 minutes. The overall construction quality also seems to be quite solid and the plastic shortcuts that many other lower end irons use is not seen here. Instead, there's metal parts employed where the iron meets the handle and there's no silly lights there to melt as some Weller irons use. The bright red color is also a really good safety feature because you're dealing with a device that can get very hot. So its not just nice looking but actually serves a safety purpose by being highly visible. There was even a second chisel shaped tip in the box and a decently written instruction book that has many good tips for the person newer to soldering.
So all in all, a truly great value to be sure.