About
All Feedback (127)
- gjwilson1 (578)- Feedback left by buyer.More than a year agoVerified purchasePrompt Payment. Thank you for your purchase.
- alamo.city.performance (6910)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (3)
24 May, 2016
It works very well.
6 of 6 found this helpful With proper carb and protein intake you'll most certainly notice large gains. I also ran this with creatine and aminos. Went from 178lbs to a solid 200lbs and received a huge gain in strength. A proper on cycles support and post cycle support is most certainly needed.
08 Mar, 2017
94 mustang
1 of 1 found this helpful Great product works great! If you are putting it on a 94 mustang it's not an easy task by any means! The stock assembly is held in by 4 big rivets that need to be either cut off or drilled out in order to get it out. Once the motor and window is out the window is riviited to the top rail just do yourself a favor and just take the top rail off the new motor and put the old one on it. Since it was to hard to put the window rail on the new motor with the motor already mounted in the door I ended up having to cut off the back two bolts on the new motor in order to get the new assembly in the door. It will not slide through the top of the door with the bolts on the motor. Once I finally got it in I wish I had another person to help me to hold the windows while I lined up the holes and put the bolts I bought from Lowes in. I did have to drill out the bolts I cut off the motor because the ends were tack welded onto the assembly. Once I got the new bolts tightened up and the roller on the top
Window rail into the guide everything went back together and works flawlessly. If you should take anything from this review one get a person to help you and two it's not an easy task and does require some power tools.
15 Jan, 2016
Great fixture for the money
Its a great product for the money. Does everything I need it to do for my anemone tank. I also have an ATI Sunpower on another tank of mine, I mean its no sunpower but thats like comparing apples to oranges. If your on a budget this is the fixture for you! Word of advice swap out the bulbs that come with the fixture for some quality bulbs. I'm running 3 ATI Blue+ and an ATI Coral+ and puts off plenty enough light for my carpet anemones. The fans do the job keeping the bulbs cooled down running at proper temps. The 2 bulbs farthest away from the LCD screen control the fans the 2 closeted bulbs will not turn on the fans so make sure you plan bulb placement and run time accordingly. Obviously if you run the closest 2 bulbs to the LCD without the farthest 2 running the fans will not turn on and you will burn out bulbs and ballasts thats the bottom line. Whenever you have the bulbs on, the fans need to be on, no if ands or buts about that. Timer was a little tricky to figure out but its not that hard the bulbs need to be on with the dots on the LCD flashing in order to start the timers you set. Overall I would recommend it to everyone who is deciding to run it on a planted, soft coral or LPS coral tank. You'll have plenty of light, but like I said swap out the bulbs for quality bulbs. You could run this on a low light SPS coral tank but it will not support high light demanding SPS coral like acropora, I know my ATI Sunpower is over an all acropora reef tank.