About
All Feedback (27)
- machinery4wood (22701)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- distancetraderuk (36187)- Feedback left by buyer.More than a year agoVerified purchaseThanks for your order!
Reviews (7)
25 Jun, 2020
Good marker - sharpening needs preperation
1 of 1 found this helpful Works well, the yellow leads are good for dark surfaces. The only downside is that when you remove the sharpener in the end cap to sharpen the lead you can no longer advance the lead. You need to remember to advance it the correct amount before you attempt to sharpen it.
21 Jun, 2018
Works well but a little expensive
Works very well in reducing wind noise including wind noise when the camera is moving. Works a lot better than the foam versions. Recomended but a little expensive for what it is
21 May, 2020
Works as expected in limited testing but difficult to fit though that is a car design problem not sensor.
Seems to work Ok with only limited testing. It was a ******* to fit due to access problems on a Skoda Octavia 2.0 FSI. Ended up removing the battery, battery case & EGR pipe to get at it. Probably did not need to remove the battery & case removing the EGR pipe allowed batter access but I did not want to disturb it. You might want to order some spare clips if you have poor access - they are very inclined to ping off while trying to fit them and disappear into the depths of the engine bay never to be seen again - and being plastic you can't retrieve them with a magnet.
I also needed to reset the fault code before the cooling fans would work correctly - if you are unable to do this I don't know if it will delete the codes when the EMU realises the sensor now works.