About
All Feedback (1,239)
- s***o (101)- Feedback left by buyer.Past 6 monthsVerified purchaseThanks, very helpful seller!
- a***6 (865)- Feedback left by buyer.Past 6 monthsVerified purchasegr8 ebayer
- s***i (1233)- Feedback left by buyer.More than a year agoVerified purchaseClock arrived safely and well packed, the vendor even made a special piece of wood to protect the glass, much appreciated. Clock was accurately described, thank you
- a***a (47)- Feedback left by buyer.More than a year agoVerified purchaseBrilliant ebayer - arrived very quickly and well wrapped.
- e***v (939)- Feedback left by buyer.More than a year agoVerified purchaseVery nice scented candle. Well packaged. Arrived on time.
- _***_ (45)- Feedback left by buyer.More than a year agoVerified purchaseVery easy transaction. Even faster delivery, next day. Well packaged. No issues. Top eBayer
Reviews (5)
31 Aug, 2017
Concept OK Build quality needs improvement
1 of 1 found this helpful Good points:
Solidly built
Four tube sizes
Reasonable instructions
Has volume graduations on chamber so you know how much oil to put back in.
Bad point:
Wouldn't hold a vacuum - traced it down to where the hose plugged into the chamber. The O-ring had not seated due to excessive flash on the plastic moudling. Out with scalpel and cleaned it up - OK after that. O-ring damaged so will need a new one at some point.
01 Jul, 2017
Simple but effective
It's a rubber/neoprene tube with a slit cut into it. Simple but very effective. The only improvement it needs is a weight added to the closed end to keep it in the receptacle.
21 Apr, 2017
Good value
This is of a better construction than I thought it was going to be - so pleasantly surprised. The instructions are rubbish - no assembly instructions and some of the descriptions do not apply to this unit. I like the testing bit - to test, turn it on and walk in front. As others have said, the spike is too flimsy - bang in a metal spike and use cable ties to fix it. Any movement of the sensor will cause it to trigger. Make sure you tighten all the joints before installing - hand tight is sufficient. The red clip that sets the arc is actually two (vertically stacked). If you rotate the clip 180 degrees and split it you can get a much wider arc of spray.