About
All Feedback (906)
- 1***s (577)- Feedback left by buyer.Past 6 monthsVerified purchasegood price fast post , well packed , As described good seller .
- t***1 (3054)- Feedback left by buyer.Past 6 monthsVerified purchaseBrilliant seller, very fast delivery
- n***6 (970)- Feedback left by buyer.Past 6 monthsVerified purchaseFast delivery well packaged many thanks
- e***t (142)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat ebay seller. Good packaging. Would use agan.
- e***a (2145)- Feedback left by buyer.Past 6 monthsVerified purchaseFast delivery great product just as described and great help when buying
- 8***o (742)- Feedback left by buyer.Past monthVerified purchaseExactly as described. Thank you.
Reviews (4)
25 Jun, 2025
Paint applied well, but colour only roug...
Paint applied well, but colour only roughly matches from certain viewings angles only. In some directions looks way too dark despite allowing several drying days. Applying gel coat Had no effect either. Had to remove and try another product. Silver cars are a b*gger to match.😐
18 Feb, 2021
Great little drone, Good Quality, at a very reasonable price.
Amazing camera footage, stable and able to battle fairly strong winds. Nicely made and light weight.
Can now record in 2.7K at 50fps, ideal for UK TV & Studio work.
26 Jul, 2018
Great device for the money, and works very well too.
3 of 3 found this helpful I wasn't expecting much for the price, but actually this is a good reliable product!
The Chinglish instructions are reasonably easy to understand, but you should take your time when measuring out the locations for the sensors. Also ensure you are going to be able to successfully route the Sensor cables through into the car. Use some masking tape at the drilling location to ensure the drill bit doesn't slip and scratch the bumper.
I installed this on a sports roadster convertible, and I'm not a big fan of displays stuck to the dashboard plugged into lighter sockets. So I installed mine towards the rear between the two rollover seat hoops. To ensure that the left and right bar graph displays still work the correct way round, I simply installed the sensors in the reverse way round, i.e. D-C-B-A looking from the rear. I then cut off the lighter socket plug and hard wired this to the reversing light as well as the control box, and this doesn't cause any problems at all. The display lights up as soon as reverse is engaged.
It works very accurately too. If the display says 1.2 metres it really is 1.2 metres to the nearest object to the left or right. The sensing starts at about 2 metres showing on the display only with no sound. Then as you close in audible warnings start at about 1.2 metres increasing in frequency until a solid tone is heard. Exactly like factory fitted ones do. In fact I'd go so far as to say that these work better than some factory fitted sensors, for example early Audi.
The kit is available in a variety of colours for the sensors, which saves you from having to either accept black or spraying them yourself, which isn't something many other sellers offer.
This is however not something for the faint hearted! There's no going back if you drill a hole in the wrong place! Do check behind the bumper for brackets etc before drilling. I used a photograph of a model of my car which had factory fitted sensors as a guide, and to some degree I ignored the suggested spacings to avoid anything that may lay behind. The instructions say to remove the bumper first, but this is not easy to do these days, but I was able to fit the sensors perfectly well without removing the bumper..