About
All Feedback (98)
- *****- Feedback left by buyer.Past yearVerified purchaseHope to deal with you again. Thank you.
- *****- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- gigaparts (27547)- Feedback left by buyer.Past yearVerified purchaseThank you for shopping with GigaParts - USA's Largest Independent HAM Dealer!
- ashleyshop888 (1097)- Feedback left by buyer.More than a year agoVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- electro-resales (11940)- Feedback left by buyer.More than a year agoVerified purchaseGreat transaction - A+ customer. Thank You!
- yohodelyed (74206)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
Reviews (8)
20 Apr, 2021
Good fit
This item fit well, actually a perfect fit. It seems more ridged than the stock one. And noticed some of the felt vibration moved more into the frame. Seems like in the range of 1500 to 2000 rpm in lower gears there is a full frame felt vibration. It’s not really annoying but it is clear. Don’t seem to notice it much in higher gears. It’s hard for me to tell because after taking the voltage regulator off the real problem was that I lost the two bolts that held the bracket that connected to the rubber mount. That means there was 0 vibration being transferred to the front mount. So I can’t compare it with the stock mount. It beats the OEM cost by $64.
29 Jun, 2021
Quality questionable
I used this to just snug the rocker bolts down and it rounded the ends a bit. Perhaps it was not bottomed out, but the wrench seemed soft. I didn’t really put excessive torque on it by just snugging them up. Not sure what would have happened if I torqued them down to 13 ft pounds.
29 Jun, 2021
Rocker box gaskets
Gaskets appear good quality. The old bottom gasket I removed was metal. The one in the kit was not. Unsure why. I’ve read on forums that the metal gasket is more dependable. That was not the gasket that was leaking. I took my bike out for a test drive of 60 miles and no leaks so at this point they are doing their job. Otherwise the intermediate gaskets were fine, and similar to the gaskets removed. Time will tell. At this point they are sealing fine.