Product reviews2013 Ford Focus St Performance Lower Engine Mount

Tighten up your MK2 or early MK3 Focus ST

This lower engine mount is the factory original part for all 2011-present Ford Focus electric cars and original equipment on the 2015-2016 Focus ST and 2016-2017 Focus RS.

I fitted mine today to a MK2 Focus ST 2.5. Was about a 1 hour job taking it easy on axle stands with limited space.

The old one was in good condition, but as stock I always hated how much the engine seemed to lurch and bump around on throttle movements, engaging the clutch, crawling in traffic in 2nd gear, etc.

This seems to have vastly reduced that, but i wouldn't say entirely eliminated it. Still it's a huge improvement without the cabin vibration that a poly bush might bring. I can't tell any difference in vibration. If there is any it's negligible.

To fit I:

Removed the under-tray (7 hex screws)
On the mount pictured Remove both bolts. Remember which one is which.
On the engine part of the mount (not pictured) Remove the rear-most bolt. It has a little plug you need to pull off.
Again on the engine side mount remove the middle bolt.
Leave the forward-most bolt in but loosen so the mount can dangle down.
Switch in new mount and reverse the process.

I can't compare to other mounts but i'm going for an OEM+ feel so it certainly works for me. There is still a little engine movement so it might not be for you, but it feels good and won't shake your car to pieces. :P

Hope this helps someone trying to decide on engine mounts!Read full review...

Product reviews images

  Product reviews images

Previous image

• 

Next image

Verified purchase:  Yes | Condition: new | Sold by: bestpartshouse

Focus ST Roll Restrictor

Quality upgrade replaced a Mountune part for this Ford part. Stops the wheel hop like the Mountune part but without the vibration. Leaves the car more comfortable to drive.

Verified purchase:  Yes | Condition: new | Sold by: oemselectautoparts

Worthwhile upgrade

Soooooo much better traction and engine response, even on my completely stock SE

Oem ford mount

Just what I wanted

Verified purchase:  Yes | Condition: pre-owned | Sold by: ratroaster

Upgraded rear mount

Used on 2013 Ford Escape, 2L turbo. Way stronger. Easy replacement.

Verified purchase:  Yes | Condition: new | Sold by: quirkparts

Great quality transmission mount.

Perfect fit replacement for a 2007 Volvo V50. It's much sturdier than the Volvo mount and I haven't noticed in added vibration through the car. Definitely a great upgrade.

Verified purchase:  Yes | Condition: new | Sold by: fairwayfordparts